Electronic Components Datasheet Search |
|
LPS5015-473MR Datasheet(PDF) 1 Page - Coilcraft lnc. |
|
LPS5015-473MR Datasheet(HTML) 1 Page - Coilcraft lnc. |
1 / 2 page Shielded Power Inductors–LPS5015 Document 585-1 Document 585-1 Revised 09/02/15 DCR SRF Isat (A)5 Irms (A)6 Inductance2 max3 typ4 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise LPS5015-102MR_ 1.0 0.050 183 3.6 3.8 3.9 1.90 2.65 LPS5015-132MR_ 1.3 0.065 150 2.5 2.6 2.8 1.70 2.35 LPS5015-182MR_ 1.8 0.075 128 2.6 2.8 2.9 1.50 2.15 LPS5015-222MR_ 2.2 0.090 116 2.4 2.6 2.7 1.40 2.00 LPS5015-332MR_ 3.3 0.125 88 1.9 2.0 2.0 1.30 1.80 LPS5015-472MR_ 4.7 0.150 73 1.6 1.7 1.8 1.20 1.62 LPS5015-562MR_ 5.6 0.175 67 1.6 1.6 1.6 1.10 1.45 LPS5015-682MR_ 6.8 0.225 57 1.3 1.4 1.5 0.90 1.25 LPS5015-822MR_ 8.2 0.280 49 1.3 1.3 1.4 0.85 1.05 LPS5015-103MR_ 10 0.300 44 1.2 1.3 1.3 0.80 0.95 LPS5015-123MR_ 12 0.350 40 1.0 1.1 1.2 0.75 0.84 LPS5015-153MR_ 15 0.360 38 0.80 0.84 0.86 0.73 0.84 LPS5015-183MR_ 18 0.550 35 0.75 0.77 0.80 0.70 0.83 LPS5015-223MR_ 22 0.675 31 0.70 0.73 0.75 0.60 0.82 LPS5015-333MR_ 33 0.750 24 0.55 0.59 0.60 0.50 0.70 LPS5015-473MR_ 47 1.00 18 0.46 0.48 0.49 0.45 0.57 LPS5015-563MR_ 56 1.13 17 0.40 0.43 0.45 0.40 0.52 LPS5015-683MR_ 68 1.45 15 0.33 0.38 0.39 0.35 0.47 LPS5015-104MR_ 100 1.95 12 0.30 0.33 0.34 0.30 0.42 LPS5015-124MR_ 120 2.50 10 0.25 0.28 0.30 0.27 0.37 LPS5015-154MR_ 150 3.40 9.3 0.23 0.25 0.26 0.25 0.33 LPS5015-224MR_ 220 4.50 7.3 0.20 0.21 0.22 0.22 0.29 LPS5015-334MR_ 330 7.40 5.7 0.15 0.17 0.18 0.17 0.22 LPS5015-474MR_ 470 7.50 4.9 0.12 0.12 0.13 0.16 0.21 LPS5015-564MR_ 560 8.50 4.3 0.10 0.11 0.12 0.14 0.190 LPS5015-684MR_ 680 10.6 4.0 0.10 0.11 0.11 0.13 0.175 LPS5015-105MR_ 1000 15.0 3.2 0.080 0.090 0.093 0.10 0.150 LPS5015-155MR_ 1500 25.0 2.5 0.080 0.086 0.088 0.090 0.140 LPS5015-185MR_ 1800 28.0 2.2 0.078 0.083 0.086 0.085 0.130 LPS5015-225MR_ 2200 36.0 2.1 0.072 0.078 0.080 0.065 0.090 • Very low DCR; excellent current handling • 5.0 × 5.0 mm footprint; less than 1.5 mm tall Designer’s Kit C350 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 102 – 107 mgAmbient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 ″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 1. Please specify termination and packaging codes: LPS5015-225MRC Termination: R= RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C= 7 ″ machine-ready reel. EIA-481 embossed plastic tape 1000 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 ″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agi- lent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. |
Similar Part No. - LPS5015-473MR |
|
Similar Description - LPS5015-473MR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |