Electronic Components Datasheet Search |
|
T55V157M6R3C0025 Datasheet(PDF) 11 Page - Vishay Siliconix |
|
T55V157M6R3C0025 Datasheet(HTML) 11 Page - Vishay Siliconix |
11 / 22 page T55 www.vishay.com Vishay Polytech Revision: 16-Nov-15 11 Document Number: 40174 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note • Test conditions per JIS C5101-1 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER 7" REEL J 4000 P 3000 A 2000 T 3000 B 2000 V 800 D 500 PERFORMANCE CHARACTERISTICS ITEM CONDITION POST TEST PERFORMANCE Temperature characteristics Measure the specified characteristics in each stage Specified initial value -55 °C +105 °C Capacitance change - -20 % to 0 % 0 % to 30 % Dissipation factor shown in Standard Ratings table or less 8 to 10 14 - Leakage current Refer to Standard Ratings table - Not more than 1 CV or 30 μA which is greater Surge voltage 105 °C, 1000 successive test cycles in series with a 1 k resistor at the rate of 30 s ON, 30 s OFF; tested voltage per table below: Capacitance change Within ± 20 % of initial value Rated voltage 2.5 4 6.3 1016202535 Dissipation factor Within initial limit Surge voltage 3.2 5.2 8.2 1320232940 Leakage current Shall not exceed 300 % of initial limit Solder heat resistance Reflow board surface peak temperature: less than 260 °C Time: 5 s max. Capacitance change Within ± 20 % of initial value Dissipation factor Initial specified value or less Leakage current Shall not exceed 300 % of initial specified value Moisture resistance no load Leave at 60 °C and 90 % RH for 500 h Capacitance change VR 4 V Relative to the value before test +50 % to -20 % VR 6.3 V Relative to the value before test +40 % to -20 % Dissipation factor Initial specified value or less Leakage current Shall not exceed 300 % of initial specified value High temperature load 105 °C. The rated voltage is applied through a protective resistor of 3 for 1000 h Capacitance change Within ± 20 % of initial value Dissipation factor Initial specified value or less Leakage current Shall not exceed 300 % of initial specified value Thermal shock Leave at -55 °C, normal temperature, 105 °C, and normal temperature for 30 min., 15 min. 30 min., and 15 min. Repeat this operation 5 times running. Capacitance change Within ± 20 % of initial value or less Dissipation factor Initial specified value or less Leakage current Shall not exceed 300 % of initial specified value Failure rate 105 °C. The rated voltage is applied through a protective resistor of 1 /V. 1 % / 1000 h |
Similar Part No. - T55V157M6R3C0025 |
|
Similar Description - T55V157M6R3C0025 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |