LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.

www.lem.com

Page 3/3

090804/6

Bottom view

Front view

Mechanical characteristics

General tolerance

± 1 mm

●

Primary through hole

Ø 21 mm

●

Fastening

2 holes Ø 3.2

●

Distance between holes axes

50 x 36 mm

or

1 hole Ø 3.2 and

1 spigot Ø 2.5

Distance between hole and sigot axes 36 mm

Connection of secondary

Molex 5046-04/AG

●

“Malting connector provided with the transducer“

Remarks

V

●

The return busbar and primary conductor elbow must be

●

located at least at 2.5 x window length more far away

from the transducer case.

Temperature of the primary busbar cannot exceed 90°C.

●

Dynamic performances are best with a primary busbar

●

completely filling the primary aperture.

This is a standard model. For different versions (supply

●

voltages, different output, unidirectional measurements

...), please contact us.

Secondary terminals

Terminal 1

: Supply voltage + 12 .. 15 V

Terminal 2

: Supply voltage - 12 .. 15 V

Terminal 3

: Output

Terminal 4

: 0V

Remarks:

located at least at 2,5 x window length more far away from the

transducer case.

completely filling the primary aperture.

voltages, different outputs, unidirectional measurements...),

please contact us.

Mechanical characteristics:

± 1 mm

∅

21 mm

2 holes ∅ 3.2

Distance between holes axes: 50 x 36 mm

or

1 x hole ∅ 3.2 and 1 spigot ∅ 2.5

Distance between hole and sigot axes : 36 mm

Front view

Bottom view

LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice.

Secondary connections:

1: Supply voltage

+12 .. 15 V

2: Supply voltage

-12 .. 15 V

3: Output

4: 0V