Electronic Components Datasheet Search |
|
SC51-CF Datasheet(PDF) 1 Page - List of Unclassifed Manufacturers |
|
SC51-CF Datasheet(HTML) 1 Page - List of Unclassifed Manufacturers |
1 / 9 page 29 A BELDEN BRAND Customer Support: 800.800.6652 www.ppc-online.com Diamond ® Bonding and Grounding Hardware Bonding Clamps Bonding Connector for Meter Pan (CATV Applications) Part Number Description Inner Pack Outer Pack SC51-1 For #10/12/14 AWG Copper Ground Wire. Made of G90 Galvanize Steel + Trivalent Chromate -- 100 • Meter pan connector designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. • Its unique design allows a fixed and positive mechanical contact without interfering with the opening of the meter pan front cover. • Tighten screws to 20 in. lbs. torque. Installation: 1. The tip of the stainless steel mounting screw is shaped to remove the paint at the point of contact, thus ensuring positive metal-to-metal contact with the top of the meter panel. (Always ensure that the bonding surface is cleaned of excess paint or rust before mounting the SC51- 1 connector.) For heavily corrosive or marine environments. use of “RTV” silicone sealer is recommended at the contact point, between the screw tip and the top of the meter pan. 2. Back the bolt and nut from the connector enough to allow it to mount on one of the corner folds of the metal meter pan back corners. 3. Install the connector with the bottom edges gripping on the bottom fold of the fixed top cover of the metal meter pan. Under no circumstances is the bonding connector to be mounted on the front cover or any movable part of the metal meter pan. Tighten the bolt securely by applying sufficient torque (20 inch pound) to ensure a firm and positive connection on the metal meter pan. 4. Remove one inch of insulation from copper ground wire, use caution to avoid scoring or damaging ground wire. Insert grounding wire between washer and grounding nut. Wrap ground wire clockwise between washer and ground nut. Insure that slot in grounding washer is aligned with ground wire. Tighten grounding nut with CNW6 tool to secure ground wire. Do not over tighten. Double check that the grounding bolt is still firmly tight on the metal meter pan enclosure. If not, tighten it one quarter turn. Recommended for usage when no other approved grounding electrode is accessible. Bonding & Grounding Hardware |
Similar Part No. - SC51-CF |
|
Similar Description - SC51-CF |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |