Electronic Components Datasheet Search |
|
HSC-AT11CS-A15 Datasheet(PDF) 2 Page - Hirose Electric |
|
HSC-AT11CS-A15 Datasheet(HTML) 2 Page - Hirose Electric |
2 / 2 page 2 Characteristic Attenuation Return loss Rated input power Controlled Operating Environment Uncontrolled Operating Environment Non-Operating Environment Humidity/Condensation Cycling Test Water Immersion Vibration Side Pull Load Cable Retention Durability Impact Test Measurement at a point within the wavelength of 1310 ±30 nm and a point within the wavelength of 1550 ±30 nm. Power : 250mW(LD) Wavelength : 1470nm Duration : 100 hours Temperature : -5ç to 50ç Duration : 182.5 hours Humidity : 15% to 90% Temperature : -40ç to 75ç Period of 1 cycle : 8 hours Number of cycles : 21 Low-Temperature Exposure and Thermal Shock Temperature : 23ç ➝ 40ç ➝ -40ç ➝ 23ç Duration : 2.1h 72 h 5 min. minimum High-Temperture Exposure and Thermal Shock Temperature : 23ç ➝ 70ç ➝ 70ç ➝ 23ç Duration : 1.6h 72 h 5 min. minimum High Relative Humidity Exposure Temperature : 23ç ➝ 40ç ➝ 40ç ➝ 23ç Duration : 0.6h 96 h 0.6h Humidity : 90% to 95% Temperature : -10ç to 65ç Period of 1 cycle : 12 hours Humidity : 90% to 100% Number of cycles : 14 Temperature : 43ç Duration : 168 hours Solution : PH 5.5 Vibration frequency range : 10 to 55 Hz Maximum amplitude: 1.52 mm Duration : 2 hours in each of 3 directions Bend angle : 90° Load : 1.25 kg Load : 2 kg Insertion/withdrawal cycles : 200 Drop onto a concrete floor from a height of 1.8 m. Cycles: 8 times in each of 3 directions 1) After test, change in attenuation(fluctuation)and return loss shall be 1) as follows. 1) • Attenuation(fluctuation) : within 0.5 dB 1) • Return loss : 60 dB min. 2) No breakage, crack or dislocation of components. Refer to the various types of attenuation tolerance (the previous page). 60 dB min. After / during test, changing in attenuation(fluctuation)shall be less than ±0.1dB. 1) After /during test, change in attenuation(fluctuation)and return loss 1) shall be as follows. 1) • Attenuation(fluctuation) : within 0.5 dB 1) • Return loss : 60 dB min. 2) No breakage, crack or dislocation of components. 1) After test, change in attenuation(fluctuation)and return loss shall be 1) as follows. 1) • Attenuation(fluctuation) : within 0.5 dB 1) • Return loss : 60 dB min. 2) No breakage, crack or dislocation of components. Test Method (Conforms with Telcordia GR-910-CORE) Specification Component Material Body Ferrule Split sleeve Zinc alloy Zirconia Zirconia sMaterials and Dimensions Serial No. 35.5 9.4 Rating Operating temperature range -40ç to +75ç Storage temperature range -40ç to +75ç Max. input power 250 mW Fiber type SMF sSpecifications 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com |
Similar Part No. - HSC-AT11CS-A15 |
|
Similar Description - HSC-AT11CS-A15 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |