Electronic Components Datasheet Search |
|
FH23-21S-0.3SHAW Datasheet(PDF) 10 Page - Hirose Electric |
|
FH23-21S-0.3SHAW Datasheet(HTML) 10 Page - Hirose Electric |
10 / 10 page 10 BConnector Operating Instructions, precautions and recommendations 2) The connector will assure reliable performance when the actuator is open to 90° maximum (see fig.1) Do not exceed this angle, as this may cause permanent damage to the connector. 3) Assure that the FPC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. 1) Do not apply excessive force or use any type of tool to operate the actuator. 90ç Operation Precautions FPC conductor surface 1.FPC Termination procedure. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. 2) Rotate down the actuator until firmly closed. NOTE: The FPC must be fully inserted in the con- nector. If not fully inserted, the actuator will not close properly. Should this be the case, lift up the actuator (per Step 2 below) and repeat the process (starting with Step 1 above) 3) For connectors with multiple contacts, such as 39 and 61 pos. rotate down the actuator pushing at both ends. 2.FPC Removal 1) Lift up the actuator. 2) Carefully remove the FPC. |
Similar Part No. - FH23-21S-0.3SHAW |
|
Similar Description - FH23-21S-0.3SHAW |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |