A279

sProduct Specifications

Rating

Current rating 0.5A

Operating Temperature Range -45 to +125ç (Note 1) Storage Temperature Range -10 to +60ç (Note 2)

Voltage rating150V AC

Operating Humidity Range 40 to 80%

Storage Humidity Range 40 to 70%

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during

transportation.

Note:The gold plated product contact area is plated with gold, and lead plated with tin-lead.

sMaterial

Product

Part

Material

Finish

Remarks

Item

specification

Condition

1. Insulation Resistance

500M ohms min.

100V DC

2. Withstanding voltage

No flashover or insulation breakdown.

250V AC/1 minute

3. Contact Resistance

50m ohms max.

100mA

4. Vibration

No electrical discontinuity of 1µs or more

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

5.

6. Temperature Cycle

Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. (-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles

7. Durability (Mating/un-mating) Contact resistance: 50m ohms max:

Tin plating: 30 cycles

Gold plating: 100 cycles

8. Resistance to Soldering heat

No deformation of components affecting performance.

Reflow: At the recommended temperature profile

Manual soldering: 300ç for 3 seconds

Receptacle/Header

Insulator

Polyamide

Beige

UL94V-0

Contact

Phosphor copper

Tin plated or gold plated

–––––––

Metal fitting

Brass

Tin plating

–––––––

s Ordering Information

Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog

page A280~A284.

*Refer to page A284 for the bottom entry type (DF9L).

DF9

# - * S - 1 V (**)

q

e

wr

t yu

q Series Name : DF9

w Type

e Number of Contacts

9 to 25,31,41,51

r Connector Type

S: Receptacle

P: Header

t Contact Pitch

: 1mm

y Contact Type

V: Straight SMT

u Contact Surface Finish/Packaging Type

(20): Tin plated, tube packaging

(54): Gold plated, tube packaging

(22): Tin plated, embossed tape packaging

(59): Gold plated, embossed tape packaging

qReceptacle/Header

Fitting Boss

Blank

KK

A

∞

K

B

K

∞

C

∞∞