FH27-10S-0.4SH datasheet(3/8 Pages) HIROSE

Part #	FH27-10S-0.4SH

Description	0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors

Download	8 Pages

Scroll/Zoom	100%

Manufacturer	HIROSE [Hirose Electric]

Direct Link	http://www.hirose-connectors.com

Logo

3 / 8 page

3

BOperation and Precautions

Operation

Precautions

1) Lift up the actuator. Use thumb or index finger.

1.FPC insertion procedure. Connector installed on

the board.

1

Do not apply excessive force or use any type of tool to operate the

actuator.

1

Lift up the actuator.

Carefully withdraw the FPC.

2.FPC removal

1

3 Rotate down the actuator until firmly closed. It is critical that the

inserted FPC is not moved and remains fully inserted.

2 The connector will assure reliable performance when the actuator is

open to 130˚maximum. Do not exceed this angle, as this may cause

permanent damage to the connector.

3 Exercise caution when applying upward force to the connected FPC.

Fully insert the FPC in the connector parallel to mounting surface, with

the exposed conductive traces facing down.

2

FPC conductor

surface

(Bottom side)

Over 130°

Similar Part No. - FH27-10S-0.4SH

Manufacturer	Part #	Datasheet	Description
GOOD-ARK Electronics	FH2	379Kb / 4P	Surface Mount Glass Passivated High Efficiency Rectifier
Sanyo Semicon Device	FH201	75Kb / 8P	VCO OSC Circuit Applications
	FH202	82Kb / 9P	VCO OSC Circuit Applications
	FH203	66Kb / 9P	VCO OSC Circuit Applications
List of Unclassifed Man...	FH20C1	32Kb / 1P	1.3mm /1.1mm Ceramic Surface Mount Crystals

Manufacturer	Part #	Datasheet	Description
Hirose Electric	FH25-21S-0.3SH	482Kb / 8P	0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
	FH36	634Kb / 12P	0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
	FH43B	1Mb / 12P	0.2 MM PITCH, 0.9 MM ABOVE THE BOARD, FLEXIBLE PRINTED CIRCUIT ZIF CONNECTORS
	FH28	828Kb / 11P	0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
	FH30	634Kb / 8P	0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
	FH26-13S-0.3SHW	652Kb / 16P	0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
	FH26-23S-0.3SHW05	662Kb / 12P	0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
	FH42	1Mb / 10P	0.3 mm Pitch, 0.65 mm above the board, Top Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
	FH26	662Kb / 12P	0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
	FH34	300Kb / 12P	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors