LVDS Interface

DCLKIN(A,B,C,D),DVALID(A,B,C,D),DIN(A,B,C,D)[15:])

DLPC910

DLP9000XFLS

APPS

FPGA

DOUT(A,B,C,D)[15:0]

DCLKOUT (A,B,C,D)

SCTRL(A,B,C,D)

RESET_ADDR(3:0)

RESET_MODE(1:0)

RESET_SEL(1:0)

RESET_STRB

RESET_OEZ

RESET_IRQZ

SCP BUS(3:0)

Power Management

OSC

50 MHz

CTRL_RSTZ

JTAG(3:0)

DLPR910

PGM(4:0)

USER

Interface

Connectivity

USB

Ethernet

Volatile

And

Non-volatile

Storage

I2C

Row and Block Signals

ROWMD(1:0),ROWAD(10:0),BLKMD(1:0),BLKAD(3:0),RST2BLKZ

Control Signals

COMP_DATA,NS_FLIP,WDT_ENBLZ,PWR_FLOAT

Status Signals

RST_ACTIVE,INIT_ACTIVE,ECP2_FINISHED

RESETZ

VLED0

VLED1

Illumination

Driver

Illumination

Sensor

DLPR910

DLPS065A – SEPTEMBER 2015 – REVISED OCTOBER 2015

www.ti.com

8 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

8.1 Application Information

The DLPR910 configuration PROM comes pre-programmed with configuration code for the DLPC910. Upon

power-up, the DLPC910 and the DLPR910 handshake with each other to enable configuration information to be

sent from the DLPR910 to the DLPC910, such that the DLPC910 can configure itself for proper operation within

the application. Without the DLPR910 properly connected to the DLPC910 in the application system, the

DLPC910 would not be able to boot itself and the system would remain inoperable.

8.2 Typical Application

A typical use case for a high speed lithography application is shown in Figure 3. For complete details of this

typical application refer to the DLPC910 data sheet listed in Related Documentation.

Figure 3. Typical High Speed Lithography Application

8.2.1 Design Requirements

The DLPR910 is part of a multi-chipset solution, and it is required to be coupled with the DLPC910 for reliable

operation of the DLP9000XFLS DMD. For more information, refer to the DLPC910 datasheet listed in Related

Documentation.

10

Submit Documentation Feedback

Copyright © 2015, Texas Instruments Incorporated

Product Folder Links: DLPR910