1) The essential difference between a standard/washdown product and a hygiene product is that where the process and contact with the medium (activity in the vicinity

of the food) are concerned, the product is designed in accordance with the latest standards and hygiene design guidelines, and materials are selected accordingly 2) 4)

REF-AC1000 3) 5) We recommend using reflective tape REF-AC1000 or reflectors based on this reflective tape, like P41F, PLV14-A, PLH25-M12 or PLH25-D12, to

ensure reliable operation. Reflectors with larger-scaled triple structures should only be used after application clarification 6) Average service life 50,000 h at TA = +25

°C

1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive

load 5) With light/dark ratio 1:1 6) Tightening torque, max.: 0.6 Nm 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity

protected 9) C = interference suppression 10) Only in case of correctly mounted IP 69K connecting cable 11) As of Ta = 50 °C, a max. supply voltage Vmax. = 24 V

and a max. load current Imax. = 50 mA is permitted 12) Using the sensor below Ta = -10 °C is possible, if the sensor is turned on at Ta > -10 °C, then the environment

cools down and the sensor is not disconnected from the supply voltage during the whole time. It is not allowed to turn on the sensor below Ta = -10 °C

Mechanics/electronics

Supply voltage:

Ripple:

Power consumption:

Output type:

PNP

Switching mode:

Light switching

Output current Imax.:

≤ 100 mA

Response time:

Switching frequency:

Connection type:

Circuit protection:::

Protection class:

III

Weight:

40 g

Polarisation filter:

ü

IO-Link:

-

Special device:

-

Optics material:

PMMA

Enclosure rating:

Ambient operating temperature:

-10 °C ... +50 °C

Ambient storage temperature:

-30 °C ... +70 °C

Ambient operating temperature extended::

Housing material:

Stainless steel, Stainless steel V4A (1.4404, 316L)