K-16

1/32 DIN Digital Panel Meter

K3GN

Nomenclature

Name

Functions

1. Main display

Displays process values, parameters, and set values.

2. Status indicators

OUT1

Lit when output 1 is ON.

OUT2

Lit when output 2 is ON.

SV

Lit when a set value is being displayed or changed.

T

Lit when the teaching function is enabled. Flashes when the K3GN is in teaching operation.

Lit when a calibration value is being displayed during user calibration. Flashes while reading a calibra-

tion value.

ZERO

Lit while the forced-zero function is activated.

HOLD

Lit when HOLD input is ON.

CMW

Lit when communications writing is “enabled” and is out when it is “disabled.”

3. Level indicator

Displays the current level that the K3GN is in. (See below for details.)

4. Level Key

Used to change the level.

5. Mode Key

Used to allow the Main display to indicate parameters sequentially.

6. Shift Key

Used to enable that set value to be changed. When changing a set value, this key is used to move

along the digits.

7. Up/Zero Key

Used to change a set value. Used to set or clear a forced-zero function when a measurement value is

being displayed.

1. Main display

2. Status indicators

3. Level indicator

4. Level key

2. Status indicators

7. Up/Zero key

6. Shift key

5. Mode key

Level indicator

Level

p

Protect

Not lit

Operation

a

Adjustment

s

Initial setting

c

Communications setting

f

Advanced function setting

u

User calibration