Electronic Components Datasheet Search |
|
Z8615 Datasheet(PDF) 7 Page - Zilog, Inc. |
|
Z8615 Datasheet(HTML) 7 Page - Zilog, Inc. |
7 / 10 page 7 Z8615 CPS DC-4143-05 TOLERANCE VALUES The Z8615 provides internal pull-up resistors. Tolerances for these resistors consists of the following: Resistor Tolerance 2.4K ± 25% 10.4K ± 35% The RC Oscillator option provided on the Z8615 requires an external 1% precision resistor. Tolerance for the oscillator consists of the following: Frequency: 4 MHz to 5 MHz Tolerance: + 10%, – 10% Note: 1) All Characteristics stated above are specified according to the following: V CC = 4.75 to 5.25 Temperature = 15 °C to 55°C 2) To measure the RC oscillator's frequency, use only a high- impedance probe (10 Mohms, 2 pf) to probe XTAL2 (Pin 2). Other probes with higher capacitance loading can create strong ground bounces which shift the frequency reading at XTAL2. Also, do not probe XTAL1 when measuring the RC frequency. Refer to the procedure for Test Conditions and Methodology. 3) To measure the POR delay, apply a square wave (amplitude = 4 volts, frequency ~ .5 Hertz) to RESET (Pin 6) then measure the time it takes for Data Strobe (Pin 8) to go high after RESET goes high. Refer to the procedure for Test Conditions and Methodology. |
Similar Part No. - Z8615 |
|
Similar Description - Z8615 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |