CC1-

www.vishay.com

Vishay Electro-Films

Revision: 27-May-13

1

Document Number: 61001

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Thin Film 0402 Size Resistor on Alumina

Product may not be to scale

The CC1- series single-value resistor chips offer a small

size, low shunt capacitance and solder pad option. The

CC1- nichrome resistors material offers excellent stability.



The

CC1-

resistors

are

manufactured

using

Vishay

Electro-Films (EFI) sophisticated thin film equipment and

manufacturing technology. The CC1- resistors are 100 %

electrically tested and visually inspected to MIL-STD-883.

FEATURES

• Wire bondable

• Small single chip size: 0.020" x 0.040"

• Case: 0402

• Resistance range: 10

 to 24 k

• Alumina substrate

• Low stray capacitance: < 0.2 pF

• Resistor material: Nichrome

• Resistor passivation coat optional

• Solder pads optional

• Material categorization:



For definitions of compliance please see

www.vishay.com/doc?99912

Note



RoHS-compliant and/or parts that are non-RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information/tables in this datasheet for details.

APPLICATIONS

Vishay

EFI

CC1-

chip

resistors

provide

excellent

high-frequency

response

and

are

ideally

suited

for

prototyping.

Typical application areas are:

•Amplifiers

• Oscillators

• Attenuators

•Couplers

•Filters

Recommended for hermetic environments where die is not

exposed to moisture.

Note

• Only 25

 to 1 k are standard strip line designs for microwave applications

Available

Available

Available

Available

TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES

PARAMETER

VALUE

UNIT

Total Resistance Range

10 to 24K



Standard Tolerances

± 0.05, ± 0.1

%

TCR

± 25, ± 50, ± 100

ppm/°C

STANDARD ELECTRICAL SPECIFICATIONS

PARAMETER

VALUE

UNIT

Noise, MIL-STD-202, Method 308

- 20 typ.

dB

Moisture Resistance, MIL-STD-202, Method 106 - Hermetic

applications

± 0.2 max.

R/R

%

Stability, 1000 h, + 125 °C, 40 mW

± 0.1 max.

R/R

%

Operating Temperature Range

- 55 to + 125

°C

Thermal Shock, MIL-STD-202, Method 107, Test Condition F

± 0.25 max.

R/R

%

High Temperature Exposure, + 150 °C, 100 h

± 0.1 max.

R/R

%

Dielectric Voltage Breakdown

400

V

Insulation Resistance



Operating Voltage

100 max.

V

DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)

0.040 max.

W

5 x Rated Power Short-Time Overload, + 25 °C, 5 s

± 0.25 max.

R/R

%

10

Ω

20

Ω 200 Ω

12 k

Ω

24 k

Ω

± 100 ppm/°C

± 50 ppm/°C

± 25 ppm/°C

0.1 %

0.5 %

Tightest Standard Tolerance Available