Electronic Components Datasheet Search |
|
M34280M1-082GP Datasheet(PDF) 3 Page - Mitsubishi Electric Semiconductor |
|
M34280M1-082GP Datasheet(HTML) 3 Page - Mitsubishi Electric Semiconductor |
3 / 47 page MITSUBISHI ELECTRIC 3 MITSUBISHI MICROCOMPUTERS 4280 Group SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER for INFRARED REMOTE CONTROL TRANSMITTERS PERFORMANCE OVERVIEW Function 62 8.0 µs (at 4.0 MHz system clock frequency) (f(XIN) = 4.0 MHz, system clock = f(XIN)/8, VDD = 3 V) 1024 words ! 9 bits 32 words ! 4 bits Seven independent output ports 1-bit I/O port with the pull-down function 3-bit input port with the pull-down function 2-bit output port (E0, E1) 4-bit I/O port with the pull-down function 1-bit output port; CMOS output 8-bit timer with a reload register 4 levels (However, only 3 levels can be used when the TABP p instruction is executed) CMOS silicon gate 20-pin plastic molded SOP (20P2N-A)/SSOP (20P2E/F-A) –20 °C to 85 °C 1.8 V to 3.6 V 400 µA (f(XIN) = 4.0 MHz, system clock = f(XIN)/8, VDD = 3 V) 0.1 µA (at room temperature, VDD = 3 V) Parameter Number of basic instructions Minimum instruction execution time Memory sizes Input/Output ports Timer 1 Subroutine nesting Device structure Package Operating temperature range Supply voltage Power dissipation (typical value) ROM RAM D0–D6 D7 E0–E2 E0, E1 G0–G3 CARR Active mode RAM back-up mode M34280M1/ E1 Output I/O Input Output I/O Output PIN DESCRIPTION Name Power supply Ground System clock input System clock output Output port D I/O port D I/O port E I/O port G Carrier wave output for remote control Input/Output — — Input Output Output I/O Output Input I/O Output Function Connected to a plus power supply. Connected to a 0 V power supply. I/O pins of the system clock generating circuit. Connect a ceramic resonator between pins XIN and XOUT. The feedback resistor is built-in between pins XIN and XOUT. Each pin of port D has an independent 1-bit wide output function. The output structure is P-channel open-drain. 1-bit I/O port. For input use, turn on the built-in pull-down transistor and set the latch of the specified bit to “0.” In addition, key-on wakeup function using “H” level sense becomes valid. The output structure is P-channel open-drain. 2-bit (E0, E1) output port. The output structure is P-channel open-drain. 3-bit input port. For input use (E0, E1), turn on the built-in pull-down transistor and set the latch of the specified bit to “0.” In addition, key-on wakeup function using “H” level sense becomes valid. Port E2 has an input-only port and has a key-on wakeup function using “H” level sense and pull-down transistor. 4-bit I/O port. For input use, set the latch of the specified bit to “0.” The output structure is P-channel open-drain. Port G has a key-on wakeup function using “H” level sense and pull-down transistor. Carrier wave output pin for remote control. The output structure is CMOS circuit. Pin VDD VSS XIN XOUT D0–D6 D7 E0–E2 G0–G3 CARR |
Similar Part No. - M34280M1-082GP |
|
Similar Description - M34280M1-082GP |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |