4

Type PFCS, 3-Phase AC Power Factor Correction Capacitors

Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The cus-

tomer is responsible for checking, confirming and verifying the extent to which the Information contained

in this datasheet or other publication is applicable to an order at the time the order is placed. All Informa-

tion given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty,

representation or responsibility of any kind, expressed or implied. Statements of suitability for certain appli-

cations are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell

Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such ap-

plications, but are not intended to constitute any guarantee, warranty or representation regarding any such

matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation

concerning the suitability for a specific customer application, use, storage, transportation, or operating

environment. The Information is intended for use only by customers who have the requisite experience and

capability to determine the correct products for their application. Any technical advice inferred from this In-

formation or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier prod-

ucts is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obliga-

tion or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most

stringent quality and safety standards regarding the design and manufacturing of its products, in light of

the current state of the art, isolated component failures may still occur. Accordingly, customer applications

which require a high degree of reliability or safety should employ suitable designs or other safeguards (such

as installation of protective circuitry or redundancies or other appropriate protective measures) in order

to ensure that the failure of an electrical component does not result in a risk of personal injury or property

damage. Although all product-related warnings, cautions and notes must be observed, the customer should

not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety

measures may not be required.