Electronic Components Datasheet Search |
|
LS7338 Datasheet(PDF) 1 Page - LSI Computer Systems |
|
LS7338 Datasheet(HTML) 1 Page - LSI Computer Systems |
1 / 5 page DELAYED-OFF LIGHT SWITCH WITH PROGRAMMABLE ON-TIMER FEATURES: • Phase-Lock Loop Synchronization allows use in Wall Switch Applications. • Operation automatically sequences from Timed-On to Delayed-Off to Off. • On-Timer programmable with external R-C. • Transition from Timed-On to Delayed Off indicated by 31% drop in Delivered Power. • Delayed-Off period denoted by Dim-to-Off operation. (See Note 1) • Control input initiates Operating Sequence and can override Automatic Sequencing. • 50/60Hz Line Frequency. • +12V to +18V Operation (VSS - VDD). • LS7338 (DIP); LS7338-S (SOIC) - See Figure 1 NOTE 1: Dim-to-Off time is Mask Programmable. The standard IC is fixed at 209 seconds for 60Hz. Dim-to-Off time can be pro- grammed within a range of 6.5 to 836 seconds. APPLICATIONS: • WALL SWITCH for incandescent lighting in garage, corridor, staircase, child’s bedroom, teenage study area. • IN-LINE SWITCH for table lamps. DESCRIPTION: The LS7338 is a monolithic MOS integrated circuit designed to turn a triac On and Off in a Power Switch for Incandescent Lighting. Ac- tivation of SENSE or SLAVE inputs turns the triac On and starts a timer. The triac remains On for the duration of the Timer which is controlled by an external R-C connected to the OSCILLATOR input. When Time-out occurs, the power delivered by the triac is stepped down by 31% and then slowly reduced to Off over a fixed period of time. In a typical application (Figure 5), the output of the LS7338 drives the gate of a triac in series with the load. There are three states through which the LS7338 can be stepped. The states and their corresponding operating mode, phase angles and delivered power levels are shown in Table 1. OPERATING DESCRIPTION: Upon power up, internal power-on-reset starts the LS7338 in STATE 0. When the SENSE input transitions to logic 0, or the SLAVE input transitions to logic 1, the IC steps to STATE 1. When implemented as shown in the application example (Fig- ure 5), this is accomplished by touching the appropriate Sensor Plate. Subsequent similar transitions at SENSE or SLAVE in- puts cause the LS7338 to step through the sequence: STATE 0 --> STATE 1 --> STATE 2 --> STATE 0, etc. STATE 1 and STATE 2 are quasi-stable states. If left in STATE 1, after a time-out period determined by the frequency set at the OSC input (See I/O Description, Pin 6), the IC automatically steps to STATE 2. (If the OSC input is deactivated, STATE 1 becomes stable and its OPERATING MODE is denoted as On). When the IC steps from STATE 1 to STATE 2, the output phase angle ø changes from 159˚ to 107˚. This corresponds to a delivered power reduction of 31%, which causes a reduction of lamp brightness. This brightness change provides the user with a positive indication that the transition from STATE 1 to STATE 2 has occurred. The Time-out period for STATE 2 is fixed at 209 seconds for 60Hz operation. (See Note 1.) TD1 = STATE 1 Time-out period. TD2 = STATE 2 Time-out period. June 2001 LSI/CSI LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747 (631) 271-0400 FAX (631) 271-0405 LS7338 UL ® A3800 7338-062001-1 1 2 3 4 5 6 7 8 PIN ASSIGNMENT - TOP VIEW FIGURE 1 SENSE SLAVE VDD (-V) TRIG VSS (+V) SYNC CAP OSC TABLE 1 (See Figures 2 and 3) STATE 0 STATE 1 STATE 2 OPERATING MODE OFF Timed-On Delayed -Off PHASE ANGLE, ø No Output 159˚ 107˚ to 41˚ % LOAD POWER (1) 0 99 68 to 7 During the STATE 2 Time-out, the TRIG phase angle ø (See Figure 2) is ramped down from 107˚ to 41˚ in decrements of 1.4˚. When ø reaches 41˚, the IC automatically steps to STATE 0, shutting the TRIG and lamp Off. The slow Dim-to-Off in STATE 2 gives the user a continuing re- minder that Delayed-Off is operating and provides the time and light with which to leave the area or to recycle the Light Switch. A new operating sequence from STATE 0 can be started only by transitions at the SENSE and SLAVE inputs. (1) The percentage of full power delivered to a resistive load by the triac switch. |
Similar Part No. - LS7338 |
|
Similar Description - LS7338 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |