Electronic Components Datasheet Search |
|
ICM7243BLPL Datasheet(PDF) 1 Page - Intersil Corporation |
|
ICM7243BLPL Datasheet(HTML) 1 Page - Intersil Corporation |
1 / 12 page 9-21 August 1997 ICM7243 8-Character, Microprocessor- Compatible, LED Display Decoder Driver Features • 14-Segment and 16-Segment Fonts with Decimal Point • Mask Programmable for Other Font-Sets Up to 64 Characters • Microprocessor Compatible • Directly Drives LED Common Cathode Displays • Cascadable Without Additional Hardware • Standby Feature Turns Display Off; Puts Chip in Low Power Mode • Sequential Entry or Random Entry of Data Into Display • Single +5V Operation • Character and Segment Drivers, All MUX Scan Circuitry, 8 x 6 Static Memory and 64-Character ASCll Font Generator Included On-Chip Description The ICM7243 is an 8-character, alphanumeric display driver and controller which provides all the circuitry required to interface a microprocessor or digital system to a 14-segment or 16-segment display. It is primarily intended for use in microprocessor systems, where it minimizes hardware and software overhead. Incorporated on-chip are a 64-character ASClI decoder, 8 x 6 memory, high power character and segment drivers, and the multiplex scan circuitry. 6-bit ASCll data to be displayed is written into the memory directly from the microprocessor data bus. Data location depends upon the selection of either Sequential (MODE = 1) or Random access mode (MODE = 0). In the Sequential Access mode the first entry is stored in the lowest location and displayed in the “left-most” character position. Each subsequent entry is automatically stored in the next higher location and displayed to the immediate “right” of the previous entry. A DISPlay FULL signal is pro- vided after 8 entries; this signal can be used for cascading devices together. A CLeaR pin is provided to clear the mem- ory and reset the location counter. The Random Access mode allows the processor to select the memory address and display digit for each input word. The character multiplex scan runs whenever data is not being entered. It scans the memory and CHARacter drivers, and ensures that the decoding from memory to display is done in the proper sequence. Intercharacter blanking is provided to avoid display ghosting. Ordering Information PART NUMBER TEMP. RANGE (oC) PACKAGE PKG. NO. ICM7243AIJL -25oC to 85 40 Ld CERPDIP F40.6 ICM7243AIPL -25oC to 85 40 Ld PDIP E40.6 ICM7243BIJL -25oC to 85 40 Ld CERPDIP F40.6 ICM7243BlPL -25 to 85 40 Ld PDIP E40.6 File Number 3162.1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 |
Similar Part No. - ICM7243BLPL |
|
Similar Description - ICM7243BLPL |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |