Wall Industries, Inc.

Rev C

DCMPPW10 SERIES

Up to 10 Watts, Medical DC/DC Power Converters

10/27/2014

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 1 of 5

FEATURES

DESCRIPTION

Applications:

The DCMPPW10 series of medical DC/DC power converters provides up to 10 Watts of output power in a 1.25” x

0.80” x 0.40” DIP package. This series consists of single and dual output models with 4:1 ultra wide input voltage

ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 89%, 5000VAC I/O (2 MOPP)

isolation, and -40°C to +105°C operating temperature range. These converters are also protected against short

circuit, over voltage, and over load conditions. All models are RoHS compliant and have ANSI/AAMI ES60601-1,

EN60601-1, and IEC60601-1 safety approvals. Remote on/off and Trim functions are also available for this series.

MODEL SELECTION TABLE

SINGLE OUTPUT MODELS

Input Voltage

Output

Voltage

Output

Current

Output

Ripple & Noise

No Load

Input Current

Output

Power

Efficiency

Maximum

Capacitive Load

DCMPPW10-24S33x

3.3 VDC

2500mA

30mVp-p

6mA

8.25W

83%

3000µF

DCMPPW10-24S05x

5 VDC

2000mA

30mVp-p

6mA

10W

86.5%

2500µF

DCMPPW10-24S12x

12 VDC

830mA

40mVp-p

6mA

10W

89%

430µF

DCMPPW10-24S15x

15 VDC

670mA

40mVp-p

6mA

10W

89%

350µF

DCMPPW10-24S24x

24VDC

(9 - 36 VDC)

24 VDC

416mA

50mVp-p

6mA

10W

89%

125µF

DCMPPW10-48S33x

3.3 VDC

2500mA

30mVp-p

4mA

8.25W

82.5%

3000µF

DCMPPW10-48S05x

5 VDC

2000mA

30mVp-p

4mA

10W

86.5%

2500µF

DCMPPW10-48S12x

12 VDC

830mA

40mVp-p

4mA

10W

89%

430µF

DCMPPW10-48S15x

15 VDC

670mA

40mVp-p

4mA

10W

89%

350µF

DCMPPW10-48S24x

48 VDC

(18 - 75 VDC)

24 VDC

416mA

50mVp-p

4mA

10W

88.5%

125µF

DUAL OUTPUT MODELS

Input Voltage

Output

Voltage

Output

Current

Output

Ripple & Noise

No Load

Input Current

Output

Power

Efficiency

Maximum

Capacitive Load

DCMPPW10-24D05x

±5 VDC

±1000mA

30mVp-p

6mA

10W

85%

±1440µF

DCMPPW10-24D12x

±12 VDC

±416mA

40mVp-p

6mA

10W

89%

±250µF

DCMPPW10-24D15x

24 VDC

(9 - 36 VDC)

±15 VDC

±333mA

40mVp-p

6mA

10W

88%

±180µF

DCMPPW10-48D05x

±5 VDC

±1000mA

30mVp-p

4mA

10W

85%

±1440µF

DCMPPW10-48D12x

±12 VDC

±416mA

40mVp-p

4mA

10W

88%

±250µF

DCMPPW10-48D15x

48 VDC

(18 - 75 VDC)

±15 VDC

±333mA

40mVp-p

4mA

10W

88%

±180µF

NOTES

1. The “x” in the model number represents the Pin Connection type. It can be “A” for pin connection type A or “B” for pin connection type B. See mechanical

drawings on page 4 for more information.

2. The DCMPPW10 series meets EMI Class A without an external filter added. This series can only meet EMI Class B with external components added. Please

contact factory for more information.

3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.

• For 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 470µF/50V) in parallel.

• For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330µF/100V) in parallel.

4. Remote On/Off control is optional and is only available for “B” type pin connection models. To order the converter with remote on/off add the suffix

“-P” to the model number (Ex: DCMPPW10-48S12B-P).

5. Trim function is optional and is only available for “B” type pin connection models. To order the converter with Trim pin add the suffix “-T” to the model

number (Ex: DCMPPW10-48S12B-T).

CAUTION:

This power module is not internally fused. An input line fuse must always be used.