S0143, Rev.03. (web) 2013-05-17

TRPEG1-G MR CWDM

Absolute Maximum Ratings

Parameter

Symbol

Minimum

Maximum

Units

Storage Temperature Range

T

ST

- 40

+ 85

°C

Commercial

T

OP

- 5

+ 70

°C

Extended

- 5

+ 85

Supply Voltage

V

CC

0

+ 4.5

V

Input Voltage

V

IN

0

V

CC

V

1

Measured on top side of SFP module at the front center vent hole of the cage.

Pb

The TRPEG1-G MR CWDM SFP series of multi-rate fiber optic transceivers

with integrated digital diagnostics monitoring functionality provide

a quick and reliable interface for 1000BASE-LX Gigabit Ethernet and

1.062GBd Fibre Channel applications. The transceivers are designed to

support data rates ranging from 1.25Gb/s down to 125Mb/s. Diagnostics

monitoring functionality (alarm and warning features) is integrated into

SFF-8472, Rev. 9.4.

There are eighteen center wavelengths available, from 1271nm to 1611nm.

Two optical link power budget options are offered, YX (22dB minimum)

and ZX (24dB minimum). They correspond to transmission distances of

62km and 70km respectively (assuming a total connector/splice/ CWDM

mux and demux loss of 4.5dB, allocated system penalty of 2dB and fiber

loss of 0.25dB/km). All modules satisfy Class I Laser Safety requirements in

accordance with the U.S. FDA/CDRH and international IEC-60825 standards.

The TRPEG1-G MR CWDM transceivers connect to standard 20-pad SFP

connectors for hot plug capability. This allows the system designer to make

configuration changes or maintenance by simply plugging in different

types of transceivers without removing the power supply from the host

system.

The transceivers have colored bail-type latches, which offer an easy and

convenient way to release the modules. The latch is compliant with the SFP

MSA.

The transmitter and receiver DATA interfaces are AC coupled internally. LV-

TTL Transmitter Disable control input and Loss of Signal output interfaces

are also provided.

The transceivers operate from a single +3.3V power supply over an

operating case temperature range of -5°C to +70°C (Commercial) or -5°C to

+85°C (Extended). The housing is made of metal for EMI immunity.

Product Description



Eighteen (18) Wavelength CWDM Transceivers



Lead Free Design & RoHS Compliant



Compliant to SFP MSA



Compatible with IEEE 802.3z Gigabit Ethernet

1000BASE-LX PMD Specifications



Compatible with 1.062GBd Fibre Channel 100-SM-

LC-L FC-PI Standards



Digital Diagnostics through Serial Interface



Internal Calibration for Digital Diagnostics



Minimum Optical Link Power Budgets of 22dB and

24dB to Support 62km and 70km



Eye Safe (Class I Laser Safety)



Duplex LC Optical Interface



Loss of Signal Output & TX Disable Input



Hot-pluggable

Features

Multi-rate Gigabit Ethernet & FibreChannel SFP

CWDM Transceivers with Digital Diagnostics