1.5mm pitch/Disconnectable Crimp style connectors

Emboss Tape

7.1

4.6

1.5

φ0.7

±0.03

φ0.7

±0.03

1.5

±0.05

3.5

Top entry type

Side entry type

1.5

(N-1)

×

φ1.1

＋0.1

0

＋0.9

1.5

±0.05

1.3

±0.1

1.5

±0.1

1.5

±0.05

1.4

±0.1

1.1

±0.1

SM2 type

Side entry type

Side entry type

SM4 type

Top entry type

The ZH connector is very small with a

mounting height of 5.6mm and a thickness

of only 3.5mm. Contact retention lances on

the housing make insertion easier, while the

dimple at the center of the contact ensures

reliable contact with the post.

• Compact, low profile design

• Housing lances

• Reliable contact construction

• Distortion resistant construction

• Compatible with the ZR insulation

displacement connectors

Specifications –––––––––––––––––––

• Current rating:

1.0A AC, DC (AWG #26)

• Voltage rating:

50V AC, DC

(including temperature rise in applying

electrical current)

• Contact resistance: Initial value/20m Ω max.

After environmental testing/30m Ω max.

• Insulation resistance:

500M Ω min.

• Withstanding voltage:

500V AC/minute

• Applicable wire: AWG #32 to #26

• Applicable PC board thickness: 0.6 to 1.2mm,1.6mm

* RoHS compliant products are published.

* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

Standards ––––––––––––––––––––––

Note: 1. Tolerances are non-cumulative:

±0.05mm for all centers.

2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should

be larger. The dimensions above should serve as a guideline. Contact JST for details.

Note: 1. N...Number of circuits

2. Tolerances are non-cumulative:

±0.05mm for all centers.

3. The dimensions above should serve as a guideline. Contact JST for details.

PC board layout and Assembly layout

16