© 2014 Littelfuse, Inc.

Specifications are subject to change without notice.

Revised: 05/23/14

Varistor Products

Radial Lead Varistors > ZA Series

Description

The ZA Series of transient voltage surge suppressors

are radial leaded varistors (MOVs) designed for

use in the protection of low and medium-voltage

circuits and systems. Typical applications include

motor control, telecom, automotive systems,

solenoid, and power supply circuits to protect circuit

board components and maintain data integrity.

These devices are available in five model sizes:

5mm, 7mm, 10mm, 14mm and 20mm, and feature

a wide V

See ZA Series Device Ratings and Specifications

Table for part number and brand information.

Features

• Lead–free,Halogen-

Free and RoHS

compliant

• Wideoperatingvoltage

range V

M(AC)RMS

4V to 460V

• DCvoltageratings

5.5V to 615V

• Noderatingupto

85ºC ambient

• 5modelsizes

available: 5, 7, 10,

14, and 20mm

• Radialleadpackagefor

hard-wired or printed

circuit board designs

• Availableintapeand

reel or bulk pack

• Standardlead

form options

Agency Approvals

Absolute Maximum Ratings

•Forratingsofindividualmembersofaseries,seeDeviceRatingsandSpecificationschart

Agency

Agency File Number

E135010,

(+ E320116 except parts V8ZAxxP and V12ZAxxP)

116895

42201-006

Continuous

ZA Series

Units

Steady State Applied Voltage:

AC Voltage Range (V

4 to 460

V

DC Voltage Range (V

5.5 to 615

V

Transients:

Peak Pulse Current (I

For 8/20µs Current Wave (See Figure 2)

50 to 6500

A

Single Pulse Energy Range (Note 1)

For 10/1000µs Current Wave (W

0.1 to 52

J

Operating Ambient Temperature Range (T

-55 to +85

ºC

Storage Temperature Range (T

-55 to +125

ºC

<0.01

%/ºC

Hi-Pot Encapsulation (COATING Isolation Voltage Capability)

(Dielectric must withstand indicated DC voltage for one minute per MIL–STD–202, Method 301)

2500

V

COATING Insulation Resistance

1000

MΩ

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only

rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is

not implied.

ZA Varistor Series

RoHS