PM8-Series – P48WG-xxxxE/Z2:1LF – Single and Dual Output – 2”x1” - Metal Case

Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.

Page 4/4

App Notes

3 = One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%.

4 = Tested by nominal Vin and 25% load step change (75% - 50% - 25% of Io)

5 = Input filter components (C1, L)are used to helpmeet conducted emissions requirent for the module. These components

should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise.

6 = An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5

- Input filter components (C1, C2, L) are used to help meet conducted emissions requirement for the module. These

components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated

noise.

Part #

C1

L

P48WG-12xx

330uF/100V

12uH

P48WG-24xx

220uF/100V

12uH

P48WG-48xx

220uF/100V

12uH

EMC SPECIFICATIONS

Radiated

Emissions

EN 55022

CLASS A

Conducted

Emissions

5

EN 55022

CLASS A

ESD

EN 61000-4-2

Perf. Criteria B

RS

EN 61000-4-3

Perf. Criteria A

EFT

6

EN 61000-4-4

Perf. Criteria B

Surge

6

EN 61000-4-5

Perf. Criteria B

CS

EN 61000-4-6

Perf. Criteria A

PFMF

EN 61000-4-8

Perf. Criteria A

Over Voltage Protection (Zender diode clamp)

3.3 Vout:

3.9 V

5 Vout

6.2 V

12 Vout

15 V

15 Vout

18 V

± 12 Vout

± 15 V

± 15 Vout

± 18 V

Under Voltage Lockout (typ.)

12 Vin Models

Module ON/OFF 8.6V / 7.9V

24 Vin Models

Module ON/OFF 17.8V / 16V

48 Vin Models

Module ON/OFF 33.5V / 30.5V

Remote ON/OFF Control

ON:

3 -12 VDC or open circuit

OFF:

0 – 1.2 VDC or Short circuit

PIN2 and PIN6

OFF idle current:

5mA, typ.

Notes:

4

5

3

4

Rtrim-up

Rtrim-down

External Output Trimming

Output can be externally trimmed.

(Single output models only!)