PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and Dual Output – 2”x1” - Metal Case

Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.

Page 1/4

P42WG-xxxxE/Z2:1(H35)LF

All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified

Input Specifications

Voltage Range

Input Filter

Capacitors

Input Reflected Ripple Current¹

35 mA pk-pk

20mS, typ.

Output Specifications

Voltage Accuracy

± 1%

Short Circuit Protection

Over Current Protection

140% of max. Iout

Line Regulation

± 0.5%

± 0.5%

100 mV pk-pk

Temperature Coefficient

± 0.02% / °C

General Specifications

Efficiency

See Table

I/O Isolation Capacitance

500 pF, typ.

I/O Isolation Resistance

1000 M Ohm

Switching Frequency

200 kHz, typ.

Humidity

95% rel H

> 1.121 Mhrs

Physical Specifications

Case Material

Nickel Coated Brass

Potting Material

Weight

~ 30g, typ.

Environment Specifications

Operating Temperature

Maximum Case Temperature

100°C

Storage Temperature

-40 to +125°C

Cooling

Free Air Convection

RoHS Conform

Mainzer Straße 151–153

D-55299 Nackenheim

Tel. +49 6135 7026-0

Fax: +49 6135 931070

www.peak-electronics.de

peak@peak-electronics.de

The PM7 series P42WG-xxxxE/Z2:1(H35)LF is a family of cost effective

10W, single & dual output DC-DC converters with a wide input range of 2:1.

high performance features: 1500VDC up to 3500VDC input/output isolation

voltage, continuous short circuit protection with automatic restart and tight

line / load regulation, high efficiency operation and output voltage accuracy

of ±1% maximum.

PM7-SERIES

10 Watt

2:1 Wide Input

2” x 1” Case

1.5 - 3.5 kV DC I/O Isolation

Regulated Output

Single and Dual Output

Continuous Short Circuit Prot.

Rev.03-2009