PMQ-Series – P18TG-xxxxE/Z4:1(H35)LF – Single and Dual Output – DIP24 - Plastic Case

Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.

Page 1/3

P18TG-xxxxE/Z4:1(H35)LF

All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified

Input Specifications

Voltage Range

4:1 Ultra Wide Input

Input Filter

Pi Type

Input Reflected Ripple Current¹

35 mA pk-pk

Output Specifications

Voltage Accuracy

± 1%

Short Circuit Protection

Line Regulation

± 0.5%

Load Regulation

± 0.5% (3.3 / ± 3.3Vout Models: ± 1.5%)

60 mV pk-pk

Temperature Coefficient

± 0.02% / °C

General Specifications

Efficiency

See Table

I/O Isolation Capacity

470 pF, typ.

I/O Isolation Resistance

1000 MOhm

266 kHz

Humidity

95% rel H

> 1.121 Mhrs

Physical Specifications

Case Material

Potting Material

Weight

~ 13.5g, typ.

Environment Specifications

Operating Temperature

Maximum Case Temperature

100°C

Storage Temperature

-40 to +125°C

Cooling

Free Air Convection

RoHS Conform

Mainzer Straße 151–153

D-55299 Nackenheim

Tel. +49 6135 7026-0

Fax: +49 6135 931070

www.peak-electronics.de

peak@peak-electronics.de

The PMQ series P18TG-xxxxE/Z4:1(H35)LF is a family of cost effective

4W, single & dual output DC-DC converters with a ultra wide input range of

performance features: 1500 to 3500VDC input/output isolation voltage,

continuous short circuit protection with automatic restart and tight line / load

regulation, high efficiency operation and output voltage accuracy of ±1%

maximum.

PMQ-SERIES

4 Watt

4:1 Ultra Wide Input

Regulated

Single and Dual Output

1.5 to 3.5 kV DC I/O Isolation

DIP24 Plastic Case

Continuous Short Circuit Prot.

Rev.09-2009