Electronic Components Datasheet Search |
|
OP299 Datasheet(PDF) 4 Page - OPTEK Technologies |
|
OP299 Datasheet(HTML) 4 Page - OPTEK Technologies |
4 / 8 page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C 03/2012 Page 4 of 8 Plastic Infrared Emitting Diode OP290 Series Notes: 1. Measurement is taken at the end of a single 100 µs pulse. Heating due to increased pulse rate or pulse width will cause a decrease in reading. 2. Measurement of the average apertured radiant energy incident upon a sensing area 0.250” (6.35 mm) in diameter perpendicular to and centered on the mechanical axis of the lens and the specified distance from the end of the device. On all models in this series, EE(APT) is not necessarily uniform within the measured area. 3. Measurement is taken at the end of a single 10 ms pulse. Heating due to increased pulse rate or pulse width will cause a decrease in reading. Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode EE (APT) (2) Apertured Radiant Incidence OP290A OP290B OP290C 210 180 150 - - - - 300 - IF = 1.50 A (1)(2) Measured into a 0.250” [6.35mm] aperture 0.2” (5.08 mm) from the tip of the lens. OP291A OP291B OP291C 16 13 10 - - - - 26 - IF = 100 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 0.2” (5.08 mm) from the tip of the lens. OP292A OP292B OP292C 2.7 2.2 1.7 - 3.6 - - 4.4 - IF = 20 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 0.2” (5.08 mm) from the tip of the lens. OP293A OP293B OP293C 16 13 10 - 22 - - 26 - IF = 100 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 0.2” (5.08 mm) from the tip of the lens. OP294 0.50 - 1.50 IF = 5 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 0.200” (5.08mm) from the tip of the lens. OP295A OP295B OP295C 44 33 22 - - - - 77 - IF = 1.50 A (1)(2) Measured into a 0.250” [6.35mm] aperture 1.129” (28.7 mm) from the tip of the lens. OP296A OP296B OP296C 3.6 2.6 1.6 - - - - 6.6 - IF = 100 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 1.129” (28.7 mm) from the tip of the lens. OP297FAB OP297A OP297B OP297C 2.4 0.7 0.5 0.3 - - 1.0 - - - 1.3 - IF = 20 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 1.129” (28.7 mm) from the tip of the lens. OP298A OP298B OP298C 3.0 2.4 1.8 - - - - 4.8 - IF = 100 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 0.2” (5.08 mm) from the tip of the lens. OP298AA OP298AB OP298AC OP298AD 3.5 3.5 6.5 8.5 - - - - - 8.5 11.5 - IF = 100 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 1.129” (28.7 mm) from the tip of the lens. OP299 0.15 - 0.45 IF = 100 mA (1)(2) Measured into a 0.250” [6.35mm] aperture 1.129” (28.7 mm) from the tip of the lens. mW/cm2 |
Similar Part No. - OP299 |
|
Similar Description - OP299 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |