Fiber Optic Receiver

OPF520 Series

OPTEK Technology Inc.—

1645 Wallace Drive, Carrollton, Texas 75006

Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com

Issue C

05/2013

Page 2 of 9

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Electrical/Optical Characteristics

Absolute Maximum Ratings

Storage Temperature

-55° C to +115° C

Operating Temperature

-40° C to +85° C

Lead Soldering Temperature (for 10 seconds)

260° C

Supply Voltage

-0.5 V to +7.0 V

Output Current

25 mA

Output Voltage

-0.5 V to +18.0 V

Open Collector Power Distribution

40mW

Fan Out (TTL)

Notes:

1.

2.

3.

Use recommended test circuit below.

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

CONDITIONS

High Level Output Current

5

250

µA

Low Level Output Voltage

0.2

0.5

V

Supply Current, Output High

3.5

6.3

mA

Supply Current, Output Low

6.9

10

mA

Peak Input Power Level, Output High

-40

dBm

λp = 850 nm

(Guaranteed Output High)

0.1

µW

Peak Input Power Level, Output Low

-25.4

-9.2

dBm

2.9

120

µW

(Guaranteed Output Low)

-24

-10

dBm

4.0

100

µW

Rise, Fall Time

30

ns

Propagation Delay, Output High to Low

65

ns

Propagation Delay, Output Low to High

100

ns

PWD

Pulse Width Distortion

±30

%

RoHS

Recommended Test Circuit