Model Selection Guide

Mechanical Dimensions

Notes:

1. Output regulation includes line & load.

2. Ripple & noise is measured from 10 Hz to 20 MHz. Connection to the unit

is made with a 0.1 µF ceramic capacitor & a 22 µF electrolytic capacitor

connected in parallel.

3. A 1% minimum load is required to maintain regulation & ripple specifica-

tions.

4. Transient recovery is measured to within a 1% error band for a load step

of 50% to 100%.

5. Isolation specifications are production HI-Pot tested for 3 seconds.

6. The full output range (see table) is covered in the safety agency certifica-

tion. Standard models are factory set to the Preset voltage, but may be set

to other levels within the range without affecting the agency certification.

For more information, contact the factory.

7. Output power is given for the factory preset voltage. All models provide a

peak power level of 700W for a maximum duration of 500 µS. For more

information, contact the factory.

8. Each unit includes an input fuse (T8A/250V). Since this fuse is not field

replaceable, it is recommended that an external fuse of the same size

be used on the input of the power supply for protection.

MicroPower Direct

We Power Your Success - For Less!

292 Page Street Ste D Stoughton, MA 02072

•

TEL: (781) 344-8226

•

FAX: (781) 344-8481

•

E-Mail: sales@micropowerdirect.com

Notes:

Connections

I

nput/Output Connector (CN1):

Howder No. HB-95-7P

7 pins, M3.5 Screw, 9.5 mm Centers

VHR5N or equivalent (two pins removed)

VHR10N

Crimp Terminals: SVH41T-P1.1

Pin T Block

Pin

JST

5

Field Grnd

5

6

AC-Neutral

6

7

AC-Line

7

10

1

Field Grnd

3

AC-Neutral

5

AC-Line

Logic Signal Connector (CN2):

XHP-4 or equivalent

For AWG 30 to 26

Pin

Function

1

Remote On/Off

2

Fan Fail

3

Common

4

Power Good

Fan Driver Connector (CN3):

JST XHP-2 or equivalent

Pin

Function

1

Plus

2

Minus

www.micropowerdirect.com

Models with other output voltage levels

are available (i.e. 15 VDC, 36 VDC, etc)

Contact the factory for details at:

sales@micropowerdirect.com

Model Number

Model

Number

Output

Current

(Max A)

Max.

Output

Power

(W)

Ripple

&

Noise

(% p-p)

Efficiency

(%)

PreSet

Range

12 VDC

10.0 - 13.8

33.33

400

±1%

85%

24 VDC

21.0 - 26.0

16.67

400

±1%

85%

48 VDC

43.0 - 50.0

8.33

400

±1%

85%