http://www.ia.omron.com/

C-3

(c)Copyright OMRON Corporation 2007 All Rights Reserved.

Safety Precautions for All Level Controllers

Refer to the

Safety Precautions section for each product for specific precautions applicable to that product.

!WARNING

Do not touch the terminals while power is being supplied.

Doing so may possibly result in electric shock.

Do not attempt to disassemble, repair, or modify the product while

power is being supplied. Doing so may occasionally result in electric

shock.

■ Precautions for Safe Use

In order to ensure safe operation, be sure to observe the following

points.

1. Use a power supply voltage within the specified range.

2. Do not use the Controller in locations subject to flammable gases

or objects.

3. Insert the Socket until it securely clicks into place.

4. Do not short the load connected to the output terminals.

5. Do not connect the power supply in reverse.

6. Do not use the Controller in locations subject to explosive or

combustible dust, combustible gas, flammable vapors, corrosive

gas, excessive dust, salt water spray, or water drops.

■ Precautions for Correct Use

For details, refer to Technical Guide for Level Controllers.

In the interest of product improvement, specifications are subject to change without notice.