< HIGH VOLTAGE DIODE MODULES >

RM1200DG-90F

HIGH POWER SWITCHING USE

INSULATED TYPE

High Voltage Diode Modules

December 2012

HVM-2027-B.doc

5

© 2011 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.

Notes regarding these materials

・

These materials are intended as a reference to assist our customers in the selection of the Mitsubishi

semiconductor product best suited to the customer’s application; they do not convey any license under any

intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.

・

Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s

rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application

examples contained in these materials.

・

All information contained in these materials, including product data, diagrams, charts, programs and

algorithms represents information on products at the time of publication of these materials, and are subject to

change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is

therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi

Semiconductor product distributor for the latest product information before purchasing a product listed herein.

The information described here may contain technical inaccuracies or typographical errors. Mitsubishi

Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these

inaccuracies or errors.

・

Please also pay attention to information published by Mitsubishi Electric Corporation by various means,

・

When using any or all of the information contained in these materials, including product data, diagrams,

charts, programs, and algorithms, please be sure to evaluate all information as a total system before making

a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes

no responsibility for any damage, liability or other loss resulting from the information contained herein.

・

Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or

system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi

Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use

of a product contained herein for any specific purposes, such as apparatus or systems for transportation,

vehicular, medical, aerospace, nuclear, or undersea repeater use.

・

The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or

in part these materials.

・

If these products or technologies are subject to the Japanese export control restrictions, they must be

exported under a license from the Japanese government and cannot be imported into a country other than

the approved destination.

・

Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of

destination is prohibited.

・

Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor

for further details on these materials or the products contained therein.

Keep safety first in your circuit designs!

Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more

reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead

to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit

designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of

non-flammable material or (iii) prevention against any malfunction or mishap.