DC and AC Operating Conditions

Commercial

Industrial

Operating Temperature (Case)

0°C - 70°C

-40°C - 85°C

5V

± 5%

5V

± 10%

The ATF22V10CZ provides a “zero” power CMOS PLD

solution with 5V operating voltages. The ATF22V10CZ

powers down automatically to the zero power mode

through Atmel’s patented Input Transition Detection (ITD)

circuitry when the device is idle. The ATF22V10CZ has

an edge-sensing power down feature, offering “zero” (25

µA worst case) standby power. This feature allows the

user to manage total system power to meet specific appli-

cation requirements and enhance reliability. Pin “keeper”

circuits on input and output pins eliminate static power

consumed by pull-up resistors.

The ATF22V10CZ incorporates a superset of the generic

architectures, which allows direct replacement of the

22V10 family and most 24-pin combinatorial PLDs. Ten

outputs are each allocated 8 to 16 product terms. Three

different modes of operation, configured automatically

with software, allow highly complex logic functions to be

realized.

Temperature Under Bias................... -40°C to +85°C

Storage Temperature...................... -65°C to +150°C

Voltage on Any Pin with

Respect to Ground......................... -2.0V to +7.0V

(1)

Voltage on Input Pins

with Respect to Ground

During Programming.................... -2.0V to +14.0V

(1)

Programming Voltage with

Respect to Ground....................... -2.0V to +14.0V

(1)

*NOTICE: Stresses beyond those listed under “Absolute Maxi-

mum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the

device at these or any other conditions beyond those indi-

cated in the operational sections of this specification is not

implied. Exposure to absolute maximum rating conditions

for extended periods may affect device reliability.

Absolute Maximum Ratings*

Note:

1. Minimum voltage is -0.6V dc, which may undershoot

to -2.0V for pulses of less than 20 ns. Maximum out-

put pin voltage is Vcc + 0.75V dc, which may over-

shoot to 7.0V for pulses of less than 20 ns.

2

ATF22V10CZ