US

UK

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

© Coilcraft Inc. 2013

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

Shielded PowerInductors – MOS6020

Document 287 -1

Document 287-1 Revised 10/06/08

DCR max

2

±20% (µH)

(Ohms)

(MHz)

10% drop

20% drop

30% drop

20°C rise

40°C rise

MOS6020-222ML_

2.2

0.035

110

2.86

3.26

3.56

3.0

4.1

MOS6020-332ML_

3.3

0.046

85

1.90

2.28

2.46

2.6

3.6

MOS6020-472ML_

4.7

0.050

60

1.46

1.82

1.94

2.3

3.1

MOS6020-682ML_

6.8

0.078

55

1.32

1.56

1.72

1.9

2.7

MOS6020-822ML_

8.2

0.085

45

0.94

1.18

1.30

1.7

2.3

MOS6020-103ML_

10

0.092

36

0.79

0.95

1.06

1.6

2.2

MOS6020-153ML_

15

0.130

30

0.83

0.95

1.03

1.3

1.8

MOS6020-223ML_

22

0.182

22

0.79

0.92

0.97

1.0

1.4

MOS6020-333ML_

33

0.290

20

0.57

0.67

0.74

0.80

1.1

MOS6020-473ML_

47

0.420

16

0.45

0.56

0.62

0.50

0.7

MOS6020-683ML_

68

0.520

15

0.37

0.45

0.51

0.45

0.63

MOS6020-104ML_

100

0.800

13

0.35

0.40

0.44

0.40

0.56

MOS6020-154ML_

150

1.28

10

0.26

0.30

0.33

0.35

0.49

MOS6020-224ML_

220

2.00

8

0.22

0.26

0.28

0.30

0.42

MOS6020-334ML_

330

2.84

7

0.18

0.22

0.24

0.25

0.35

MOS6020-474ML_

470

4.40

5

0.15

0.17

0.19

0.22

0.29

1. When ordering, please specify

termination and packaging codes:

MOS6020-104MLC

Termination: L = RoHS compliant matte tin over nickel over phos bronze.

Special order:

T = RoHS tin-silver-copper (95.5/4/0.5)

or

S = non-RoHS tin-lead (63/37).

Packaging: C = 7

″ machine-ready reel. EIA-481 embossed plastic

tape (500 parts per full reel).

B = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge), use

code letter C instead.

D = 13

″ machine-ready reel. EIA-481 embossed plastic

tape. Factory order only, not stocked (2000 parts per

full reel).

2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/

HP 4263B LCR meter or equivalent.

3. SRF measured using Agilent/HP 8753D network analyzer.

4. DC current at which the inductance drops the specified amount from

its value without current.

5. Current that causes the specified temperature rise from 25°C ambient.

6. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Designer’s Kit C359 contains 3 of each value

Core material Ferrite

Core and winding loss See www.coilcraft.com/coreloss

Terminations RoHS compliant matte tin over nickel over phos bronze.

Other terminations available at additional cost.

Weight 0.21 g

Ambient temperature –40°C to +85°C with

Irms current, +85°C to

+125°C with derated current

Storage temperature Component: –40°C to +125°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Packaging 500 per 7

″ reel; 2000 per 13″ reel; Plastic tape: 16 mm wide,

0.3 mm thick, 12 mm pocket spacing, 2.5 mm pocket depth

PCB washing Tested with pure water or alcohol only. For other solvents,

see Doc787_PCB_Washing.pdf.

• 6.0 × 7.1 mm footprint; 2.4 mm high shielded inductors

• Custom versions up to 4.7 mH are available.