Electronic Components Datasheet Search |
|
07010 Datasheet(PDF) 2 Page - List of Unclassifed Manufacturers |
|
07010 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers |
2 / 4 page DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website: Desco.com TB-2039 Page 2 of 4 © 2012 DESCO INDUSTRIES, INC. Employee Owned Figure 3. Verifying the calibration of the Wrist Strap Tester COMBO WRIST STRAP / FOOTWEAR TESTER Testing the Wrist Strap Circuit 1. Plug one of the included test leads into the black banana jack labeled “E” on the Calibration Unit. Connect the opposite end of the test lead into the yellow banana jack labeled “WRIST CORD” on the Combo Wrist Strap / Footwear Tester. Toggle the switch to the “WRIST CORD” position. 2. Connect the second test lead to the red 675K banana jack labeled “A” on the Calibration Unit. Touch the opposite end of the test lead to test plate on the Combo Tester and press down to activate the test. Be sure not to touch the banana plug or test plate with your skin. 3. Observe the response from the Combo Tester. The alarm should sound, and the LOW LED should illuminate red. 4. Repeat the procedure for test points B (825K), C (8.5M) and D (11.5M). The expected test results can be found in the following table. Figure 4. Connecting the test lead from banana jack “E” on the Calibration Unit to the WRIST CORD banana jack on the Combo Tester Test Point Resistance Value Test Output A 675K FAIL LOW B 825K PASS C 8.5M PASS D 11.5M FAIL HIGH Testing the Footwear Circuit 1. Plug one of the included test leads into the black banana jack labeled “E” on the Calibration Unit. Connect the opposite end of the test lead into the yellow banana jack labeled “FOOTPLATE” on the Combo Wrist Strap / Footwear Tester. Toggle the switch to the “FOOTPLATE” position. Figure 5. Verifying the calibration of the wrist strap circuit in the Combo Tester Figure 6. Connecting the test lead from banana jack “E” on the Calibration Unit to the FOOTPLATE banana jack on the Combo Tester 2. Connect the second test lead to the red 675K banana jack labeled “A” on the Calibration Unit. Touch the opposite end of the test lead to test plate on the Combo Tester and press down to activate the test. Be sure not to touch the banana plug or test plate with your skin. 3. Observe the response from the Combo Tester. The alarm should sound, and the LOW LED should illuminate red. 4. Repeat the procedure for test points B (825K), C (80M) and D (120M). The expected test results can be found in the following table. |
Similar Part No. - 07010 |
|
Similar Description - 07010 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |