A29002/A290021 Series

(February, 2002, Version 1.0)

4

AMIC Technology, Inc.

Absolute Maximum Ratings*

Ambient Operating Temperature . . . . . -55

°C to + 125°C

Storage Temperature . . . . . . . . . . . . . . -65

°C to + 125°C

Ground to VCC . . . . . . . . . . . . . . . . . . . . . . -2.0V to 7.0V

Output Voltage (Note 1) . . . . . . . . . . . . . . . -2.0V to 7.0V

All other pins (Note 1) . . . . . . . . . . . . . . . . . -2.0V to 7.0V

Output Short Circuit Current (Note 3) . . . . . . . . . . 200mA

Notes:

1. Minimum DC voltage on input or I/O pins is -0.5V.

During voltage transitions, inputs may undershoot VSS

to -2.0V for periods of up to 20ns. Maximum DC voltage

on output and I/O pins is VCC +0.5V. During voltage

transitions, outputs may overshoot to VCC +2.0V for

periods up to 20ns.

2. Minimum DC input voltage on A9 pins is -0.5V. During

VSS to -2.0V for periods of up to 20ns. Maximum DC

overshoot to 13.5V for periods up to 20ns. ( RESET is

N/A on A290021)

3. No more than one output is shorted at a time. Duration

of the short circuit should not be greater than one

second.

*Comments

Stresses above those listed under "Absolute Maximum

Ratings" may cause permanent damage to this device.

These are stress ratings only. Functional operation of

this device at these or any other conditions above

those indicated in the operational sections of these

specification is not implied or intended. Exposure to

the absolute maximum rating conditions for extended

periods may affect device reliability.

Operating Ranges

Commercial (C) Devices

°C to +70°C

VCC Supply Voltages

VCC for

± 10% devices . . . . . . . . . . . . . . +4.5V to +5.5V

Operating ranges define those limits between which the

functionally of the device is guaranteed.

Device Bus Operations

This section describes the requirements and use of the

device bus operations, which are initiated through the

internal command register. The command register itself

does not occupy any addressable memory location. The

register is composed of latches that store the commands,

along with the address and data information needed to

execute the command. The contents of the register serve

as inputs to the internal state machine. The state machine

outputs dictate the function of the device. The appropriate

device bus operations table lists the inputs and control

levels required, and the resulting output. The following

subsections describe each of these operations in further

detail.

Table 1. A29002/A290021 Device Bus Operations

Operation

CE

OE

WE

RESET

(N/A A290021)

A0 – A17

Read

L

L

H

H

Write

L

H

L

H

CMOS Standby

VCC

± 0.5 V

X

X

VCC

± 0.5 V

X

High-Z

TTL Standby

H

X

X

VCC

± 0.5 V

X

High-Z

Output Disable

L

H

H

H

X

High-Z

Reset

X

X

X

L

X

High-Z

Temporary Sector Unprotect (Note)

X

X

X

X

X

Legend:

Note: 1. See the "Sector Protection/Unprotection" section and Temporary Sector Unprotect for more information.

2. This function is not available on A290021.