Electronic Components Datasheet Search |
|
2036-20-SM-RPLF Datasheet(PDF) 1 Page - Bourns Electronic Solutions |
|
2036-20-SM-RPLF Datasheet(HTML) 1 Page - Bourns Electronic Solutions |
1 / 3 page Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 2036-xx-SM Precision Gas Discharge Tube Surge Protector Features ■ Balanced Mini-TRIGARD™ Series (5 mm diameter, 7.3 mm length) ■ Ideal for board level protection of broad- band circuits ■ Leadless, surface mount for economical assembly ■ Stable breakdown throughout life ■ High surge current rating, low insertion loss ■ UL Recognized ■ RoHS compliant* version available Impulse Transverse Delay.......................................100 V/µs .........................................................................< 75 ns Insulation Resistance (IR) .......................................100 V (50 V for Model 2036-07 & 2036-09)....................> 1010 Ω Glow Voltage ..........................................................10 mA .............................................................................~ 70 V Arc Voltage .............................................................1 A ..................................................................................~ 10 V Glow-Arc Transition Current ...........................................................................................................................< 0.5 A Capacitance ...........................................................1 MHz .............................................................................< 2 pF DC Holdover Voltage1 ............................................>135 V, (52 V for Model 2036-07, & -09, ........................< 150 ms 80 V for Model 2036-15) Impulse Discharge Current.....................................20000 A, 8/20 µs2 ........................................................... 1 operation minimum 10000 A, 8/20 µs ............................................................> 10 operations 200 A, 10/1000 µs .........................................................> 300 operations 200 A, 10/700 µs ...........................................................> 500 operations Alternating Discharge Current ................................20 Arms, 1 s2 .................................................................. 1 operation minimum 10 Arms, 1 s ...................................................................> 10 operations Operating Temperature ..................................................................................................................................- 55 to +85 °C Notes: UL Recognized component, UL File E153537. The rated discharge current for Mini-TRIGARD™ GDTs is the total current equally divided between each line to ground. Sparkover limits after life ±25 % (-25 %,+30 % for Model 2036-07, 2036-09 and 2036-60), IR >108 Ω. Operating characteristics per RUS PE-80 and Telcordia GR 1361 available on request. Line to Line voltage is approximately 1.8 to 2 times the stated Line to Ground breakdown voltage. 1 Network applied. 2 DC Sparkover may exceed ±25 % but will continue to protect without venting. Characteristics Test Methods per ITU-T (CCITT) K.12, IEEE C62.31 Bourns now offers a surface mount (SM) 3-electrode Gas Discharge Tube (GDT) surge protection device. The industry-leading quality and features of the Bourns® miniature 2036 TRIGARD™ series GDT continues in this new SM version for “pick and place” manufactur- ing techniques. The 2036 SM device is ideal for board level protection of high bandwidth applications such as xDSL, cable broadband and high speed Ethernet, due to its high energy handling capability, long and stable life performance and low capacitance of less than 2 pF. Bourns subminiature family of GDTs measure only 5 mm in diameter and are the smallest high performance GDTs in the telecom industry. Bourns® GDTs are designed to prevent damage from transient disturbances by acting as a “crowbar” in creating a short-to- ground circuit during conduction. When a voltage transient surge exceeds the defined breakdown voltage level of the GDT, the device becomes ionized and conduction takes place within a fraction of a microsecond. When the surge passes and system voltage returns to normal levels, the GDT returns to its high-impedance (off) state. *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Characteristic Model No. 2036-07 2036-09 2036-15 2036-20 2036-23 2036-25 DC Sparkover ±20 % @ 100 V/s 75 V 90 V 150 V 200 V 230 V 250 V Impulse Sparkover 100 V/µs 1000 V/µs 250 V 525 V 250 V 550 V 350 V 500 V 425 V 575 V 450 V 600 V 475 V 625 V Characteristic Model No. 2036-30 2036-35 2036-40 2036-42 2036-47 2036-60 DC Sparkover ±20 % @ 100 V/s 300 V 350 V 400 V 420 V 470 V 600 V Impulse Sparkover 100 V/µs 1000 V/µs 500 V 650 V 600 V 750 V 650 V 825 V 675 V 850 V 750 V 950 V 850 V 1100 V |
Similar Part No. - 2036-20-SM-RPLF |
|
Similar Description - 2036-20-SM-RPLF |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |