[AKD4712-A]

<KM111300>

2012/06

-8-

■ Tab Functions

1. [REG]: Register Map

This tab is for register read and write.

Each bit on the register map is a push-button switch.

Button Down indicates “H” or “1” and the bit name is shown in red (when read-only the name is shown in dark red).

Button Up indicates “L” or “0” and the bit name is shown in blue (when read-only the name is shown in gray)

Grayed out registers are Read-Only registers. They can not be controlled.

The registers which are not defined on the datasheet are indicated as “---”.

Figure 3. [REG] window