Electronic Components Datasheet Search |
|
LMT86 Datasheet(PDF) 4 Page - Texas Instruments |
|
|
LMT86 Datasheet(HTML) 4 Page - Texas Instruments |
4 / 16 page LMT86, LMT86-Q1 SNIS169A – MARCH 2013 – REVISED JUNE 2013 www.ti.com OPERATING RATINGS VALUE UNIT TMIN ≤ TA ≤ TMAX °C Specified Temperature Range: −50 ≤ TA ≤ 150 °C Supply Voltage Range (VDD) 2.2 to 5.5 V Thermal Resistance ( θJA) (1) (2) (SOT) 415 °C/W (1) The junction to ambient thermal resistance ( θJA) is specified without a heat sink in still air. (2) Changes in output due to self heating can be computed by multiplying the internal dissipation by the thermal resistance. ACCURACY CHARACTERISTICS These limits do not include DC load regulation. These stated accuracy limits are with reference to the values in Table 1. PARAMETER CONDITIONS TYPICAL LIMITS (1) UNIT 40°C to 150°C; VDD = 2.4 V to 5.5 V 0.4 2.7 °C 0°C to 40°C; VDD = 2.4 V to 5.5 V 0.7 2.7 °C Temperature Error (2) 0°C to 70°C; VDD = 3.0 V to 5.5 V 0.3 2.7 –50°C to 0°C; VDD = 3.0 V to 5.5 V 0.7 2.7 °C –50°C to 0°C; VDD = 3.6 V to 5.5 V 0.25 °C (1) Limits are specified to TI's AOQL (Average Outgoing Quality Level). (2) Accuracy is defined as the error between the measured and reference output voltages, tabulated in the Transfer Table at the specified conditions of supply gain setting, voltage, and temperature (expressed in °C). Accuracy limits include line regulation within the specified conditions. Accuracy limits do not include load regulation; they assume no DC load. ELECTRICAL CHARACTERISTICS Unless otherwise noted, these specifications apply for +VDD = 2.2 V to 5.5 V. Boldface limits apply for TA = TJ = TMIN to TMAX ; all other limits TA = TJ = 25°C. PARAMETER CONDITIONS TYPICAL (1) MAX (2) UNITS Sensor Gain –10.9 mV/°C Source ≤ 50 μA, (VDD - VOUT) ≥ 200 mV –0.22 –1 mV Load Regulation (3) Sink ≤ 50 μA, VOUT ≥ 200 mV 0.26 1 mV Line Regulation (4) 200 μV/V TA = 30°C to 150°C, (VDD - VOUT) ≥ 100 mV 5.4 8.1 μA IS Supply Current(5) TA = -50°C to 150°C, (VDD - VOUT) ≥ 100 mV 5.4 9 μA CL Output Load Capacitance 1100 pF Power-on Time (6) CL= 0 pF to 1100 pF 0.7 1.9 ms Output drive ±50 µA (1) Typicals are at TJ = TA = 25°C and represent most likely parametric norm. (2) Limits are specific to TI's AOQL (Average Outgoing Quality Level). (3) Source currents are flowing out of the LMT86/LMT86-Q1. Sink currents are flowing into the LMT86/LMT86-Q1. (4) Line regulation (DC) is calculated by subtracting the output voltage at the highest supply voltage from the output voltage at the lowest supply voltage. The typical DC line regulation specification does not include the output voltage shift discussed in OUTPUT VOLTAGE SHIFT. (5) The input current is leakage only and is highest at high temperature. It is typically only 0.001 µA. The 1 µA limit is solely based on a testing limitation and does not reflect the actual performance of the part. (6) Specified by design and characterization. 4 Submit Documentation Feedback Copyright © 2013, Texas Instruments Incorporated Product Folder Links: LMT86 LMT86-Q1 |
Similar Part No. - LMT86 |
|
Similar Description - LMT86 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |