For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

4

HMC547LP3 / 547LP3E

v02.0612

GaAs MMIC SPDT NON-REFLECTIVE

SWITCH, DC - 20 GHz

Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

4. PAD BURR LeNGth ShALL Be 0.15mm MAXiMUM.

PAD BURR heiGht ShALL Be 0.05mm MAXiMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED

LAND PAtteRN.

Part Number

Package Body Material

Lead Finish

MSL Rating

hMc547LP3

Low Stress injection Molded Plastic

Sn/Pb Solder

MSL1

[1]

547

XXXX

hMc547LP3e

RohS-compliant Low Stress injection Molded Plastic

100% matte Sn

MSL1

[2]

547

XXXX

[1] Max peak reflow temperature of 235 °C

[2] Max peak reflow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information