www.ti.com

ABSOLUTE MAXIMUM RATINGS

DISSIPATION RATINGS TABLE

TPS75801

,, TPS758A01

TPS75815, TPS75818

TPS75825, TPS75833

SLVS330F – JUNE 2001 – REVISED APRIL 2007

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be

more susceptible to damage because very small parametric changes could cause the device not to meet its published

specifications.

PRODUCT

TPS758xxyyyz

XX is nominal output voltage (for example, 25 = 2.5V, 01 = Adjustable).

or

YYY is package designator.

Z is package quantity.

(1)

For the most current specification and package information, refer to the Package Option Addendum located at the end of this datasheet

or see the TI website at www.ti.com.

(2)

range.

TPS758xx

UNIT

–0.3 to 6

V

Voltage range at EN

–0.3 to 6

V

Peak output current

Internally limited

Continuous total power dissipation

See Dissipation Ratings Table

5.5

V

–40 to +150

°C

–65 to +150

°C

ESD rating, HBM

2

kV

ESD rating, CDM

500

V

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated is not implied. Exposure to

absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to network terminal ground.

PACKAGE

(1)

TO-220

2

TO-263

2

(1)

ground plane. There was no air flow across the packages.

(2)

to the package.

(3)

underneath the package.

2

Submit Documentation Feedback