173D

www.vishay.com

Vishay Sprague

Revision: 05-Apr-12

1

Document Number: 40019

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Axial-Leaded, Molded Case

FEATURES

• Axial

through-hole

terminations:

Tin/lead

(SnPb), 100 % tin (RoHS-compliant)

• Miniature axial-lead capacitors available in 5

sizes

• Precision molded in gold colored, flame

retardant, thermosetting epoxy resin

• Laser marked for improved legibility and

tapered end of case provides easy identification of

positive terminal

• Standard orders are lead taped and reeled; orders under

500 are taped only

• Material categorization: For definitions of compliance

Note

Exemptions may apply.

APPLICATIONS

Designed for high performance automotive, industrial and

commercial electronic equipment.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C

(to + 125 °C with voltage derating)

Capacitance Tolerance: At 120 Hz, + 25 °C.

± 20 %, ± 10 % standard ± 5 % available as special

Capacitance Range: 0.10μF to 330 μF.

Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,

as determined from the expression 2

fRC, shall not exceed

the values listed in the Standard Ratings table.

DC Leakage Current (DCL Max.):

At + 25 °C: Leakage current shall not exceed the values

listed in the Standard Ratings table.

At + 85 °C: Leakage current shall not exceed 10 times the

values listed in the Standard Ratings table.

At + 125 °C: Leakage shall not exceed 15 times the values

listed in the Standard Ratings table.

Life Test: Capacitors shall withstand rated DC voltage

applied at + 85 °C for 2000 h and for 1000 h applied

at + 25 °C derated voltage.

Following the life test:

1. DCL shall not exceed 125 % of the initial requirements.

2. Dissipation Factor shall meet the initial requirement.

3. Change in capacitance shall not exceed ± 10 %.

ORDERING INFORMATION

173D

335

X9

006

U

W

E3

MODEL

CAPACITANCE

CAPACITANCE

TOLERANCE

DC VOLTAGE RATING

AT + 85 °C

CASE

CODE

PACKAGING

RoHS

COMPLIANT

This is expressed in picofarads.

The first two digits are the

significant figures. The third is

the number of zeros to follow.

X0 = ± 20 %

X9 = ± 10 %

*X5 = ± 5 %

* Special order

This is expressed in volts.

To complete the three-digit

block, zeros precede the

voltage rating.

See

Ratings

and Case

Codes

table

W = Tape

and reel

Blank = Ammo

pack

E3 = 100 %

tin termination

(RoHS

compliant)

Blank = SnPb

termination

DIMENSIONS in inches [millimeters]

CASE CODE

D (MAX.)

L (MAX.)

LEAD DIAMETER

U

0.095 [2.41]

0.260 [6.60]

0.020 [0.51]

V

0.110 [2.79]

0.290 [7.37]

0.020 [0.51]

W

0.180 [4.57]

0.345 [8.76]

0.020 [0.51]

X

0.180 [4.57]

0.420 [10.67]

0.020 [0.51]

Y

0.280 [7.11]

0.550 [13.97]

0.025 [0.64]

(-)

(+)

0.875 [22.23]

L

D

0.875 [22.23]

Tinned solid leads

Tapered end identifies anode

Max.

Max.

Min.

Min.