4

Recommended Pb-Free IR Profile

Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non- Halide Flux should be used.

Regulatory Information

The ACPL-P343/W343 is approved by the following organizations:

UL

(ACPL-W343) expected prior to product release.

CSA

CSA Component Acceptance Notice #5, File CA 88324

IEC/EN/DIN EN 60747-5-2 (Option 060 Only)

Table 1. IEC/EN/DIN EN 60747-5-2 Insulation Characteristics* (Option 060 – Under Evaluation)

Description

Symbol

ACPL-P343

Option 060

ACPL-W343

Option 060

Unit

Installation classification per DIN VDE 0110/1.89, Table 1

I – IV

I – IV

I – III

I – III

I – IV

I – IV

I – IV

I – IV

I – III

Climatic Classification

55/100/21

55/100/21

Pollution Degree (DIN VDE 0110/1.89)

2

2

Maximum Working Insulation Voltage

891

1140

Input to Output Test Voltage, Method b*

Partial discharge < 5 pC

1671

2137

Input to Output Test Voltage, Method a*

Partial discharge < 5 pC

1426

1824

Highest Allowable Overvoltage

6000

8000

Safety-limiting values – maximum values allowed in the event

of a failure.

Case Temperature

Input Current

Output Power

175

230

600

175

230

600

°C

mA

mW



*

Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/

DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.

Note:

These optocouplers are suitable for “safe electrical isolation” only within the safety limit data. Maintenance of the safety data shall be ensured by

means of protective circuits. Surface mount classification is Class A in accordance with CECC 00802.