P89LPC972FDH datasheet(2/67 Pages) NXP

Part #	P89LPC972FDH

Description	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash

Download	67 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

2 / 67 page

P89LPC97X

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 8 June 2010

2 of 66

NXP Semiconductors

P89LPC970/971/972

8-bit microcontroller with accelerated two-clock 80C51 core

2.2 Additional features

A high performance 80C51 CPU provides instruction cycle times of 111 ns to 222 ns

for all instructions except multiply and divide when executing at 18 MHz. This is six

times the performance of the standard 80C51 running at the same clock frequency. A

lower clock frequency for the same performance results in power savings and reduced

EMI.

Serial flash In-Circuit Programming (ICP) allows simple production coding with

commercial EPROM programmers. Flash security bits prevent reading of sensitive

application programs.

Serial flash In-System Programming (ISP) allows coding while the device is mounted

in the end application.

In-Application Programming (IAP) of the flash code memory. This allows changing the

code in a running application.

Clock switching on the fly among internal RC oscillator, watchdog oscillator, external

clock source provides optimal support of minimal power active mode with fast

switching to maximum performance.

Idle and two different power-down reduced power modes. Improved wake-up from

Power-down mode (a LOW interrupt input starts execution). Typical power-down

current is 1

μA (total power-down with voltage comparators disabled).

Integrated PMU (Power Management Unit) automatically adjusts internal regulators to

minimize power consumption during Idle mode, Power-down mode and total

Power-down mode. In addition, the power consumption can be further reduced in

Normal or Idle mode through configuring regulators modes according to the

applications.

Active-LOW reset. On-chip power-on reset allows operation without external reset

components. A software reset function is also available.

Configurable on-chip oscillator with frequency range options selected by user

programmed flash configuration bits. Oscillator options support frequencies from

20 kHz to the maximum operating frequency of 18 MHz.

Oscillator fail detect. The watchdog timer has a separate fully on-chip oscillator

allowing it to perform an oscillator fail detect function.

Programmable port output configuration options: quasi-bidirectional, open drain,

push-pull, input-only.

High current sourcing/sinking (20 mA) on eight I/O pins (P0.3 to P0.7, P1.4, P1.6,

P1.7). All other port pins have high sinking capability (20 mA). A maximum limit is

specified for the entire chip.

Port ‘input pattern match’ detect. Port 0 may generate an interrupt when the value of

the pins match or do not match a programmable pattern.

Controlled slew rate port outputs to reduce EMI. Outputs have approximately 10 ns

minimum ramp times.

Only power and ground connections are required to operate the P89LPC970/971/972

when internal reset option is selected.

Four interrupt priority levels.

Eight keypad interrupt inputs, plus two additional external interrupt inputs.

Schmitt trigger port inputs.

Second data pointer.

Emulation support.

Similar Part No. - P89LPC972FDH

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	P89LPC972FDH	459Kb / 66P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash Rev. 02-27 April 2010

More results

Similar Description - P89LPC972FDH

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	P89LPC970	459Kb / 66P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB wide-voltage byte-erasable flash Rev. 02-27 April 2010
	P89LPC9301	312Kb / 65P	8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB 3 V byte-erasable flash Rev. 01-9 April 2009
	P89LPC980	560Kb / 85P	8-bit microcontroller with accelerated two-clock 80C51 core, 4 kB/8 kB wide-voltage byte-erasable flash with 10-bit ADC Rev. 02-8 February 2010
	P89LPC9201	335Kb / 74P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB 3 V byte-erasable flash with 8-bit ADC Rev. 01-16 April 2009
	P89LPC9331	650Kb / 94P	8-bit microcontroller with accelerated two-clock 80C51 core, 4 kB/8 kB/16 kB 3 V byte-erasable Rev. 5-10 January 2011
	P89LPC92X1	1Mb / 75P	8-bit microcontroller with accelerated two-clock 80C51 core 2 kB/4 kB/8 kB 3 V byte-erasable flash with 8-bit ADC Rev. 2-1 December 2010
	P89LPC933	366Kb / 75P	8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB/16 kB 3 V byte-erasable flash with 8-bit ADCs Rev. 07-26 November 2008
	P89LPC9331	433Kb / 93P	8-bit microcontroller with accelerated two-clock 80C51 core, 4 kB/8 kB/16 kB 3 V byte-erasable flash with 8-bit ADCs Rev. 03-2 June 2009
	P89LPC933	372Kb / 75P	8-bit microcontroller with accelerated two-clock 80C51 core 4 kB/8 kB/16 kB 3 V byte-erasable Flash with 8-bit ADCs Rev. 06-20 June 2005
	P89LPC952	339Kb / 69P	8-bit microcontroller with accelerated two-clock 80C51 core 8 kB/16 kB 3 V byte-erasable flash with 10-bit ADC Rev. 04-24 July 2008

More results

P89LPC972FDH Datasheet(PDF) 2 Page - NXP Semiconductors

P89LPC972FDH Datasheet(HTML) 2 Page - NXP Semiconductors

Similar Part No. - P89LPC972FDH

Similar Description - P89LPC972FDH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL