HDSP-H15x

IV Bin Category

Min.

Max.

K

9.20

16.90

L

13.80

25.30

M

20.70

38.00

N

31.10

56.90

O

46.60

85.40

Intensity Bin Limits (mcd)

AlGaAs Red

HDSP-550x/552x

IV Bin Category

Min.

Max.

E

0.91

1.67

F

1.37

2.51

G

2.05

3.76

H

3.08

5.64

I

4.62

8.64

J

6.93

12.70

K

10.39

19.04

HER

HDSP-570x/572x

IV Bin Category

Min.

Max.

D

0.61

1.11

E

0.91

1.67

F

1.37

2.51

G

2.05

3.76

H

3.08

5.64

I

4.62

8.64

J

6.93

12.70

K

10.39

19.04

Yellow

HDSP-560x/562x

IV Bin Category

Min.

Max.

E

0.91

1.67

F

1.37

2.51

G

2.05

3.76

H

3.08

5.64

I

4.61

8.46

Green

Dominant Wavelength (nm)

Color

Bin

Min.

Max.

Yellow

1

581.50

585.00

3

584.00

587.50

2

586.50

590.00

4

589.00

592.50

Green

2

573.00

577.00

3

570.00

574.00

4

567.00

571.00

5

564.00

568.00

Color Categories

Note:

All categories are established for classification of products. Products

may not be available in all categories. Please contact your Avago repre-

sentatives for further clarification/information.

For product information and a complete list of distributors, please go to our web site:

www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.

Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5988-4273EN

AV02-1107EN - June 29, 2010

Electrical/Optical

For more information on electrical/optical characteristics,

please see Application Note 1005.

Contrast Enhancement

For information on contrast enhancement please see Ap-

plication Note 1015.

Soldering/Cleaning

Cleaning agents from the ketone family (acetone, methyl

ethyl ketone, etc.) and from the chlorinated hydrocarbon

family (methylene chloride, trichloro–ethylene, carbon

tetrachloride, etc.) are not recommended for cleaning LED

parts. All of these various solvents attack or dissolve the

encapsulating epoxies used to form the package of plastic

LED parts.

For information on soldering LEDs please refer to Ap-

plication Note 1027.