BCD20015-G Rev. AB, 29-Mar-10

Page 2 of 6

www.power-one.com

FNP300 AC-DC Power Supply Data Sheet

12V, 24V, 48V Output, 300 Watts

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely effect long-

term reliability, and cause permanent damage to the converter.

Parameter

Conditions/Description

Min

Max

Units

Input Voltage

Continuous

Transient, 60 ms

264

300

VAC

VAC

Operating Temperature

Ambient

0

55

°C

Storage Temperature

Non-operational

-40

85

°C

Environmental, Mechanical, & Reliability Specifications

All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.

Parameter

Conditions/Description

Min

Nom

Max

Units

Operating Humidity

Relative humidity, non-condensing

10

90

%

Storage Humidity

Relative humidity, non-condensing

5

95

%

Shock

IEC/EN 60068-2-27, 11 ms

30

Sinusoidal Vibration

IEC/EN 60068-2-6

2-8 Hz

8-200 Hz

200-500 Hz

7.5

2

4

mil

MTBF

200

kh

Isolation Specifications

The electric strength test is performed in the factory as routine test in accordance with EN 550116, IEC/EN 60950,

and UL 1950 and should not be repeated in the field. Power-One will not honor any warranty claims resulting from

electric strength field tests.

Parameter

Conditions/Description

Min

Nom

Max

Units

Insulation Safety Rating

Input/Case

Input/Output

Output/Case

Basic

Reinforced

Functional

Electric Strength Test Voltage

Input/Case

Input/Output

Output/Case

2.121

4.2

0.5

kVDC

kVDC

kVDC

EMC Specifications

All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.

Parameter

Description

Criterion

Electrostatic Discharge

IEC/EN 61000-4-2, level 4 (contact/air)

8/15 kV, criterion B

Electromagnetic Field

IEC/EN 61000-4-3, level 3

10 V/m, criterion A

Eletr. Fast Transients / Burst

IEC/EN 61000-4-4, level 4 (direct/capacitive)

2/1 kV, criterion B

Surge

IEC/EN 61000-4-5, level 3 (L/L, L/C)

1/2 kV, criterion B

Voltage Dips and Interruptions

IEC/EN 61000-4-11

Criterion B

RF Conducted Immunity

IEC/EN 61000-4-6

10 VAC, AM 80%, 1 kHz,

criterion A

Emissions Radiated/Conducted

CISPR 22/EN 55022/EN 61204

Class B

Harmonics

IEC/EN 61000-3-2

Class B

Voltage Fluctuation and Flicker

IEC/EN 61000-3-3

Pass