R10DS0089EJ0400 Rev.4.00

Page 1 of 35

Nov 09, 2012

Datasheet

2-WORD BURST OPERATION

Description

The

μPD46365092B is a 4,194,304-word by 9-bit, the μPD46365182B is a 2,097,152-word by 18-bit and the

μPD46365362B is a 1,048,576-word by 36-bit synchronous quad data rate static RAM fabricated with advanced CMOS

technology using full CMOS six-transistor memory cell.

The

μPD46365092B, μPD46365182B and μPD46365362B integrate unique synchronous peripheral circuitry and a

burst counter. All input registers controlled by an input clock pair (K and K#) are latched on the positive edge of K and

K#.

These products are suitable for application which require synchronous operation, high speed, low voltage, high density

and wide bit configuration. These products are packaged in 165-pin PLASTIC BGA.

Features

• 1.8 ± 0.1 V power supply

• 165-pin PLASTIC BGA (13 x 15)

• HSTL interface

• PLL circuitry for wide output data valid window and future frequency scaling

• Separate independent read and write data ports with concurrent transactions

• 100% bus utilization DDR READ and WRITE operation

• Two-tick burst for low DDR transaction size

• Two input clocks (K and K#) for precise DDR timing at clock rising edges only

• Two output clocks (C and C#) for precise flight time and clock skew matching-clock

and data delivered together to receiving device

• Internally self-timed write control

• Clock-stop capability. Normal operation is restored in 20

μs after clock is resumed.

• User programmable impedance output (35 to 70 Ω)

• Fast clock cycle time : 3.3 ns (300 MHz), 4.0 ns (250 MHz).

• Simple control logic for easy depth expansion

• JTAG 1149.1 compatible test access port

R10DS0089EJ0400

Rev.4.00

Nov 09, 2012