Electronic Components Datasheet Search |
|
DF11-8DS-2R26 Datasheet(PDF) 2 Page - Hirose Electric |
|
DF11-8DS-2R26 Datasheet(HTML) 2 Page - Hirose Electric |
2 / 14 page 104 DF11 Seriesq2mm Double-Row Connector (Product Compliant to UL/CSA Standard) sProduct Specifications Current rating (Note 1) Voltage rating Crimping Insulation Displacement Crimping 250V AC Insulation Displacement 100V AC AWG #22 to #26 : 2A Wire size AWG #28 : 1A AWG #30 : 0.5A Wire size AWG #26 : 1A Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range sUL·CSA Safety Standard File No. UL :E52653 CSA :LR95109 -30 to 85ç Note 2 40 to 80% -10 to 60ç Note 3 40 to 70% Note 1: Current rating of header is 2A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Item Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30m ohms max. 100mA 4. Single Insertion/Extraction Force 0.3N (30gf) min., 4.4N(450gf) max. Measured by the square steel-made pin of 0.5±0.002mm 5. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 7. Temperature Cycle Contact resistance: 30m ohms max. Insulation resistance: 1000M ohmsmin. (-55ç: 30 minutes ➝ 5 to 35ç: 5 to 15 minutes (-85ç: 30 minutes ➝ 5 to 35ç: 5 to 15 minutes) 5 cycles 8. Durability (Mating/un-mating) Contact resistance: 30m ohms max. Tin plated: 30 cycles Gold plated:50 cycles Flow: Manual soldering: 9. Resistance to Soldering heat No deformation of components affecting performance. 260ç for 10 seconds 300ç for 2 seconds Reflow: Manual soldering: At the recommended temperature profile 300ç for 3 seconds sFeatures of DF11 Insulation Displacement Machine (Single Core Punching Full Automatic ID Machine AM700/DF11) q 5 Major Features of ID Machine AM700/DF11 1. Perform the multi-harness. 2. The setup time has been widely reduced. (10 minutes maximum) 3. Space saving design. (About half space compared with the conventional machine) 4. Minimize initial cost with low cost. 5. The harness data can be saved in the floppy disk and easily changed. sPoints Since the DF11 insulation displacemention allows double rows ID with a single part, the harness service is completed with machine connection only. Rating Current rating Voltage rating UL-CSA Safety Standard Approved Specification 30V AC AWG #22 : 2A Wire size AWG #24 to #28 : 1A AWG #30 : 0.5A Rating Data storage Low cost Multi-harness Half space Setup in 10 minutes The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. |
Similar Part No. - DF11-8DS-2R26 |
|