Continued from the preceding page.

http://www.murata.com/

Data Sheet

! Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

2

2007.9.6

Coils/Inductors/Microchip Transformer > Chip Coils > for High Frequency Monolithic Type

Part Number

Inductance

Test Frequency

Rated Current

Max. of DC Resistance

Q (min.) Test Frequency

Self Resonance Frequency (min.)

LQG18HNR10J00p

100nH

±5%

100MHz

300mA

0.90ohm

12

100MHz

800MHz

100

1000

10000

Frequency (MHz)

200

160

120

80

40

0

3.3nH

10nH

68nH

100

1000

10000

1000

100

10

1

68nH

10nH

3.3nH

Frequency (MHz)

Operating Temperature Range: -40

°C to +85°C

Only for reflow soldering.

I Q - Frequency Characteristics (Typ.)

I Inductance - Frequency Characteristics (Typ.)

!Caution (Rating)

Do not use products beyond the rated current as

this may create excessive heat.

Notice

Solderability of Tin plating termination chip might be

deteriorated when low temperature soldering profile

where peak solder temperature is below the Tin melting

point is used. Please confirm the solderability of Tin

plating termination chip before use.

I !Caution/Notice