Electronic Components Datasheet Search |
|
E3S-DS30E41 Datasheet(PDF) 8 Page - Omron Electronics LLC |
|
E3S-DS30E41 Datasheet(HTML) 8 Page - Omron Electronics LLC |
8 / 15 page E3S 8 Safety Precautions This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. Do not use the product in atmospheres or environments that exceed product ratings. If the sensing object has a metallic or shiny surface, the E3S- R may not detect it properly. To avoid this situation, place the sensing object so that it is not at right angles to the Photoelectric Sensor. ● Attaching the E39-S Slit • The Slit can be fitted vertically or horizontally as indicated by the dotted line. Make sure that Slits for the Emitter and the Receiver are fitted in the same orientation. • Place the packing in the supporter and hook the claws on the indentations in the Sensor head. • If the supporter is contacting the mounting surface, insert a spacer to separate it. (Refer to Slit Dimensions.) • An operating position accuracy of 0.1 mm max. can be achieved for a Through-beam Sensor without Slits. Sensor with Slits ● Sensors with Open-collector Outputs Sensors with Open-collector Outputs The model numbers are as follows: Example: E3S-DS10E4 (E type) E3S-DS1C4 (C type) E3S-DS1B4 (B type) C4 (C41, C42) Sensors C4 (B41, B42) Sensors Note 1. Only C42 models with die-cast cases are available. 2. The Emitter for a Through-beam C4-type Sensor is the same as the Emitter for an E4-type Sensor. (E.g., E3S-5LE4) 3. When a C- or B- type Sensor experiences a load short-circuit or overload, the output transistor will be turned OFF. Check the load conditions before turning the power back ON. WARNING Precautions for Correct Use Applicable Photoelectric Sensor E3S-5E4, -5E41 (42) E3S-2E4, -2E41 Model E39-S1 E39-S2 Item Slit width 0.5 mm 1 mm 2 mm 4 mm 0.5 mm 1 mm 2 mm Sensing distance 230 mm 580 mm 1200 mm 2500 mm 170 mm 420 mm 820 mm Sensing object 0.5 mm 1 mm 2 mm 4 mm 0.5 mm 1 mm 2 mm Degree of protection IP60 Create an angle. Glossy surface Sensing object 10 ° to 20° Reflector Supporter Cut-out section Claws Slit Sensor head Indentation Protrusion Packing B Packing A Type Output type Output transistor Rated current output Switching current Output protection circuit E Voltage or current output NPN 1.5 to 4mA 80 mA max. (sinking) Provided against an increase in the residual output voltage C Open- collector output NPN --- 100 mA max. (sinking) Provided: Output transistor cutoff B Open- collector output PNP --- 100 mA max. (sourcing) Provided: Output transistor cutoff Brown * 0 V Load (relay) Black (output) Blue * Photo- electric Sensor main circuit +V Z 2.2 Ω Brown * 0 V Load (relay) Black (output) Blue * Photo- electric Sensor main circuit +V Z 2.2 Ω Z: Zener diode (Vz = 30 V) * The operation mode depends on the wiring of the brown and blue lines. |
Similar Part No. - E3S-DS30E41 |
|
Similar Description - E3S-DS30E41 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |