E3S-C

2

Accessories (Order Separately)

Note: 1. When using any reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide.

2. Refer to Reflectors on E39-L/F39-L/E39-S/E39-R for details.

* Values in parentheses indicate the minimum distance required between the Sensor and Reflector.

Mounting Brackets

Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.

2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details.

Sensor I/O Connectors

Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.

2. For details on Sensor I/O Connectors and cables such as vibration-proof robot cables, refer to Introduction to Sensor I/O Connectors.

Slit width

Sensing

distance

Minimum detect-

able object

(typical)

Model

Quantity

Remarks

0.5 mm

× 11 mm

1.8 m

0.5-mm dia.

E39-S61

1 set each for

Emitter and Re-

ceiver

(8 Slits total)

(Snap-in Long Slit)

Can be used with the E3S-CT

@1(-M1J)

1 mm

× 11 mm

3.5 m

1-mm dia.

2 mm

× 11 mm

7 m

2-mm dia.

4 mm

× 11 mm

15 m

2.6-mm dia.

Name

Sensing distance (typical)

Model

Quantity

Remarks

Reflectors

3 m (rated value)

E39-R1

1

Provided with the E3S-CR

@1 (-M1J) Retro-reflective Sensor.

4 m

E39-R2

1

---

Small Reflectors

1.5 m

E39-R3

1

---

750 mm

E39-R4

1

---

Tape Reflectors

E39-RS1

1

Enables MSR function.

E39-RS2

1

E39-RS3

1

Appearance

Model

Quantity

Remarks

E39-L102

1

Provided with Horizontal Models.

E39-L103

1

Provided with Vertical Models.

E39-L85

1

Mounting bracket for changing from E3S-

@@@@@42/44 to E3S-C Vertical Models.

E39-L86

1

Mounting bracket for changing from E3S-

@@@@@43 to E3S-C Vertical Models.

E39-L87

1---

Cable

Appearance

Cable type

Model

Standard

2 m

3-wire

XS2F-D421-DC0-A

5 m

XS2F-D421-GC0-A

2 m

XS2F-D422-DC0-A

5 m

XS2F-D422-GC0-A

Straight

L-shape