industrial.panasonic.com/ac/e/

AXN(1/3/4)

ACCTB25E 201303-T

ORDERING INFORMATION

1. P8 (11.5 mm)

2. P8 (3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 13.0 mm, 14.0 mm)

AXN

1

0115

Terminal shape/Mated direction/Mated height

0: For SMD vertical mating, mated height 11.5 mm

Surface treatment (Contact portion / Terminal portion)

1: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

Other specifications

5: Part control number

Number of pins (2 digits)

Packing

P: Embossed tape and paper reel

× 2

S: Tube package

1: Narrow Pitch Connector P8 (0.8 mm pitch)

Socket and header are common

Suction cover

Nil: Without suction tape

C: With suction tape

Functions

1: With soldering terminals, with positioning bosses

AXN

Mated height

<Socket>

0: For mated height 3.0 mm, 4.0 mm and 5.0 mm

1: For mated height 6.0 mm, 7.0 mm, 8.0 mm, 13.0 mm and 14.0 mm

2: For mated height 3.5 mm, 4.5 mm and 5.5 mm

<Header>

0: For mated height 13.0 mm

1: For mated height 14.0 mm

3: For mated height 3.0 mm, 3.5 mm and 6.0 mm

4: For mated height 4.0 mm, 4.5 mm and 7.0 mm

5: For mated height 5.0 mm, 5.5 mm and 8.0 mm

Surface treatment (Contact portion / Terminal portion)

<Socket>

0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Applies to mated heights of 6.0 to 14.0 mm.)

8: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Applies to mated heights of 3.0 to 5.5 mm.)

<Header>

0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

Packing

J: 1,500 pieces embossed tape and paper reel

× 2

P: 1,000 pieces embossed tape and paper reel

× 2

S: Tube package

Number of pins (2 digits)

3: Narrow Pitch Connector P8 (0.8 mm pitch) Socket

4: Narrow Pitch Connector P8 (0.8 mm pitch) Header

Suction tape and cover

Nil: Socket; without suction tape, Header; without suction cover

C: Socket; with suction tape, Header; with suction cover

Functions

3: With positioning bosses

(Except for mated height 13.0 mm header, embossed tape packing)

4: Without positioning bosses

(Mated height 13.0 mm header, embossed tape packing and mated height 14.0 mm header only)

Notes: 1. The tape width for 100-pin embossed tape packaging is non-JIS standard. Please inquire.

2. The depth of the embossed tape for headers with 13 mm and 14 mm mated heights is non-JIS standard. Please test with your mounter before using.

3. Models possible for “J” packaging are as follows:

Socket mated heights: 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, and 5.5 mm

Headers: Mated heights 3.0 mm, 3.5 mm, and 6.0 mm