T4-LDS-0231, Rev. 1 (111902)

©2011 Microsemi Corporation

Page 2 of 5

1N5415 thru 1N5420

MAXIMUM RATINGS

Notes: 1. At 3/8 inch (10 mm) lead length from body.

2. Derate linearly at 22 mA/

does not exceed 175

MECHANICAL and PACKAGING

•

CASE: Hermetically sealed voidless hard glass with tungsten slugs.

•

TERMINALS: Axial-leads are tin/lead (Sn/Pb) over copper. RoHS compliant matte-tin is available for commercial grade only.

•

MARKING: Body paint and part number.

•

POLARITY: Cathode band.

•

TAPE & REEL option: Standard per EIA-296. Contact factory for quantities.

•

WEIGHT: 750 milligrams.

•

See Package Dimensions on last page.

PART NOMENCLATURE

JAN

1N5415

(e3)

Reliability Level

JAN = JAN Level

JANTX = JANTX Level

JANTXV = JANTXV Level

JANS = JANS Level

Blank = commercial

JEDEC type number

See Electrical Characteristics

table

RoHS Compliance

e3 = RoHS compliant (available

on commercial grade only)

Blank = non-RoHS compliant

SYMBOLS & DEFINITIONS

Symbol

Definition

Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.

Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range

excluding all transient voltages (ref JESD282-B).

Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave

input and a 180 degree conduction angle.

Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.

Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and

temperature.

Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from

the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs.